mangavalk/klipper-macros
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Stop using bdwidth while printing, work without it

Browse Source 
bdwidth's motion reading stays at 0, its per-reading width compensation
made the flow jump between 77 and 119%, and a USB dropout shut down
Klipper. PRINT_START no longer enables it. _PRINT_CLEANUP,
BLOBIFIER_CHECKED and PURGE_UNTIL_EMPTY only send bdwidth commands when
[bdwidth fila_width_0] exists, and bdwidth_status reports present: False
with neutral values when it is not configured, so the section can be
removed from printer.cfg.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-10-12 18:18:40 +02:00
1 parent 76172fbc4f
commit 93f00c87a7
6 files changed
+28 -14
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

README.md
+2 -2
View File
@@ -20,7 +20,7 @@ everything below, grouped by topic. Comment out what you do not use there.
| `blobifier.cfg` | `BLOBIFIER`, `BLOBIFIER_CLEAN`, `BLOBIFIER_PARK`, `BLOBIFIER_SHAKE_BUCKET`, ...: purge bucket and nozzle brush for AFC (Turtleblobifier, heavily modified) | Blobifier hardware, AFC |
| `blobifier_hw.cfg` | servo and bucket switch pins | — |
| **print/** | | |
| `print_start_end.cfg` | `PRINT_WARMUP`, `PRINT_START`, `PRINT_END` | Beacon, AFC, Blobifier, `HEAT_SOAK`, iHeater, bdwidth, bd_pressure PA macros |
| `print_start_end.cfg` | `PRINT_WARMUP`, `PRINT_START`, `PRINT_END` | Beacon, AFC, Blobifier, `HEAT_SOAK`, iHeater, bd_pressure PA macros (bdwidth is no longer enabled while printing) |
| `pause_resume.cfg` | `PAUSE`, `RESUME`, `CANCEL_PRINT`, `M600` (RESUME also handles a running `HEAT_SOAK`, and after a PAUSE purges 40 mm with `BLOBIFIER_CHECKED` first: a failed check keeps the print paused, `RESUME PURGE=0` skips the purge; CANCEL_PRINT runs the same cleanup as `PRINT_END`) | `heating/heat_soak.cfg`, `leds/`, `blobifier/`, `afc/purge_check.cfg` |
| `filament.cfg` | `LOAD_FILAMENT`, `UNLOAD_FILAMENT` | — |
| `homing.cfg` | `HOME` | — |
@@ -50,7 +50,7 @@ everything below, grouped by topic. Comment out what you do not use there.
| File | For |
|---|---|
| `xy_drift.py` | `AFC_XY_SAFETY_CHECK`: measures lost XY steps from the stepper step counts at the endstop triggers (CoreXY). The toolhead position after homing cannot show lost steps. |
| `bdwidth_status.py` | exposes bdwidth's motion counter and width to macros, and keeps a USB dropout of bdwidth (port: usb) from shutting down Klipper: the read is retried every 10 s and the port reopened |
| `bdwidth_status.py` | exposes bdwidth's motion counter and width to macros (`present: False` with neutral values when no bdwidth is configured, so the macros also work without it), and keeps a USB dropout of bdwidth (port: usb) from shutting down Klipper: the read is retried every 10 s and the port reopened |
| `bdpressure_check.py` | bd_pressure load check (`BDP_CHECK_START/STOP/QUERY`). Needs the load-check firmware from the bd_pressure `load-check-extension` branch; on stock firmware it reports "not available" and does nothing. |
### Scripts (`scripts/`)