TWIST_CALIBRATE: axis twist calibration from Mainsail

scripts/twist_check.py runs on the Pi and measures or verifies the nozzle vs
Beacon offset; windows explain each step, show progress and give a verdict,
with an HTML report in config/twist_data/. It refuses to start during a print,
stops on unexpected readings and never changes printer.cfg.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-03 22:53:48 +01:00
1 parent 2c1fd27dc6
commit 92d86d6bfd
6 files changed
+852 -2

No files matched your search

+4 -1
View File
@@ -37,7 +37,10 @@ detection, `filament_error_sensitivity`), iHeater chamber heater.
On the Pi, `macros/` is linked as `~/printer_data/config/klipper-macros/`
and `scripts/` as `~/printer_data/config/klipper-macros-scripts/`.
- `extras/*.py` are linked into `~/klipper/klippy/extras/`.
- `scripts/` MCU firmware update scripts (printer-specific IDs).
- `scripts/` MCU firmware update scripts (printer-specific IDs) and
`twist_check.py` (axis twist calibration, runs on the Pi and talks to
Moonraker on localhost; started by `TWIST_CALIBRATE` in
`macros/calibration/twist_check.cfg`, results in `config/twist_data/`).
- `tools/effective_config.py` expands the includes like Klipper and compares
the result between git refs.