From 82f9486160e4d0dd0106c7455b343e135319ed94 Mon Sep 17 00:00:00 2001 From: MangaValk Date: Mon, 12 Oct 2026 19:46:36 +0200 Subject: [PATCH] README: remove the section on switching from config folder copies The printer now runs from the repo, so the one-time migration notes are no longer needed. Co-Authored-By: Claude Opus 5.5 --- README.md | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/README.md b/README.md index 74d9f61..c5d2b89 100644 --- a/README.md +++ b/README.md @@ -114,28 +114,6 @@ Then: Updates then come through Moonraker; it re-runs `install.sh` and restarts Klipper. -### Switching from copies in the config folder - -If these macros already exist as files in your config folder (as on the -original printer: `Macros/*.cfg` and `bd_pa_afc_spoolman.cfg`), remove those -includes when adding `klipper-macros.cfg`, otherwise the macros are defined -twice and the old copy may win: - -- remove `[include bd_pa_afc_spoolman.cfg]` and - `[include ./blobifier/blobifier.cfg]` from `printer.cfg`, -- remove `[include ./Macros/macros.cfg]` and add - `[include klipper-macros/klipper-macros.cfg]` after `[include AFC/*.cfg]`, -- keep including what is not in this repo yourself, for example - `[include Macros/timelapse.cfg]` and `[include Macros/TEST_SPEED.cfg]`. - -`bd_pa_variables.cfg` (saved PA values and the Blobifier blob count) stays -where it is, in the config folder; it is data, not part of the repo. Before, -both `blobifier.cfg` and `bd_pa_afc_spoolman.cfg` had their own -`[save_variables]`; Klipper merged them and the last one won, so the blob -count was already stored in `bd_pa_variables.cfg` and -`blobifier/blob_vars.cfg` was no longer used. Now it is defined once, in -`save_variables.cfg`. - ## Adapting to another printer These are the settings of one printer. Before using a file, check: