BDP_TOUCH: default STOP 60
At 2.2 force per 0.01 mm (measured 2026-11-02) the old default of 80 was out of reach within FLOOR from Z0.15 (peak 70 at -0.35); 60 is reached at about 0.27 mm into the bed and still leaves ~100 readings for the fit. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
7761e8f803
commit
2c1fd27dc6
3 files changed
+13
-11
No files matched your search
@@ -1,7 +1,7 @@
|
||||
# Touch comparison: Beacon contact vs bd_pressure (needs extras/bdp_touch.py
|
||||
# and the bd_pressure load-check firmware). See extras/bdp_touch.py.
|
||||
#
|
||||
# TOUCH_COMPARE [N=10] [X=175] [Y=175] [TEMP=150] [THRESHOLD=15] [STOP=80]
|
||||
# TOUCH_COMPARE [N=10] [X=175] [Y=175] [TEMP=150] [THRESHOLD=15] [STOP=60]
|
||||
# [SPEED=0.3] [START=0.1]
|
||||
# Nozzle to TEMP (Beacon contact refuses above 180C), HOME (contact Z),
|
||||
# then N pairs at X/Y: one Beacon contact probe, one BDP_TOUCH starting
|
||||
@@ -33,6 +33,6 @@ gcode:
|
||||
G90
|
||||
G1 X{x} Y{y} Z5 F6000
|
||||
M400
|
||||
_TOUCH_COMPARE N={params.N|default(10)|int} START={params.START|default(0.1)|float} THRESHOLD={params.THRESHOLD|default(15)|float} STOP={params.STOP|default(80)|float} SPEED={params.SPEED|default(0.3)|float}
|
||||
_TOUCH_COMPARE N={params.N|default(10)|int} START={params.START|default(0.1)|float} THRESHOLD={params.THRESHOLD|default(15)|float} STOP={params.STOP|default(60)|float} SPEED={params.SPEED|default(0.3)|float}
|
||||
M104 S0
|
||||
{% endif %}
|
||||
Reference in new issue
Block a user