Purge check: stop an infinite spool swap when the check fails

An AFC swap pauses and resumes the file without the PAUSE and RESUME macros
and only stops on AFC's own error state. A failed check called PAUSE, so the
swap went on and restarted the print while the printer counted as paused.

During a swap (file paused, pause_resume not paused) the check now raises an
error at the end of BLOBIFIER_CHECKED, after the temperature and sensor
cleanup. CHANGE_TOOL catches it and pauses through AFC_error. AFC's remap is
skipped, so the message names the SET_MAP command. Other failed checks still
call PAUSE.

Read from AFC 5ea84ea and Klipper 0cee841; render tests only, not yet run on
the printer.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-06 20:58:17 +01:00
1 parent b415cbebf4
commit 19c70ebeb8
2 files changed
+36 -1

No files matched your search

+4
View File
@@ -62,6 +62,10 @@ detection, `filament_error_sensitivity`), iHeater chamber heater.
calls `_BED_CHECK_RETRY`, which sets the print file back to the `PRINT_START`
line (`M26`) and resumes. Everything after the check belongs in
`_PRINT_START_FINISH`: a pause does not stop a running macro.
- An AFC infinite spool swap pauses and resumes the file without the PAUSE and
RESUME macros and only stops on AFC's own error state, so PAUSE cannot stop it.
During a swap `print_stats.state` is paused with `pause_resume.is_paused` False;
a failed purge check then raises an error (`_PURGE_CHECK_SWAP_STOP`).
- Only one `[save_variables]`, in `macros/save_variables.cfg`.
- PA values are saved per nozzle and spool (`pa_value_0_4_spool_<id>`), the fitted
size in `pa_nozzle` (`SET_NOZZLE`). The slicer's `NOZZLE=` on `PRINT_WARMUP` must