Include after AFC, link scripts/ into the config folder

- bd_pa_spoolman.cfg renames AFC's SET_SPOOL_ID, so klipper-macros.cfg
  must be included after [include AFC/*.cfg]; the README said otherwise.
- install.sh links scripts/ as ~/printer_data/config/klipper-macros-scripts
  so the scripts can be edited in Mainsail/Fluidd.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

install.sh

@@ -6,7 +6,8 @@
 #
 # What it does (safe to run again, Moonraker runs it after every update):
 #   1. links extras/*.py into ~/klipper/klippy/extras/
-#   2. links macros/ to ~/printer_data/config/klipper-macros
+#   2. links macros/ to ~/printer_data/config/klipper-macros and scripts/
+#      to ~/printer_data/config/klipper-macros-scripts (editable in the web UI)
 #   3. makes the shell scripts executable
 #   4. adds an [update_manager klipper-macros] section to moonraker.conf
 #      (once, with a backup of moonraker.conf)
@@ -21,6 +22,7 @@ KLIPPER_DIR="${KLIPPER_DIR:-$HOME/klipper}"
 CONFIG_DIR="${CONFIG_DIR:-$HOME/printer_data/config}"
 MOONRAKER_CONF="$CONFIG_DIR/moonraker.conf"
 LINK_NAME="$CONFIG_DIR/klipper-macros"
+SCRIPTS_LINK="$CONFIG_DIR/klipper-macros-scripts"
 EXTRAS_DIR="$KLIPPER_DIR/klippy/extras"
 ORIGIN="$(git -C "$REPO_DIR" remote get-url origin 2>/dev/null || echo "https://mangavalk.com/mangavalk/klipper-macros.git")"
 
@@ -36,7 +38,9 @@ if [[ ${1:-} == --uninstall ]]; then
             rm "$target" && echo "removed $target"
         fi
     done
-    [[ -L $LINK_NAME ]] && rm "$LINK_NAME" && echo "removed $LINK_NAME"
+    for link in "$LINK_NAME" "$SCRIPTS_LINK"; do
+        if [[ -L $link ]]; then rm "$link" && echo "removed $link"; fi
+    done
     echo "Remove [include klipper-macros/...] from printer.cfg and the"
     echo "[update_manager klipper-macros] section from moonraker.conf yourself,"
     echo "then restart the Klipper service."
@@ -61,12 +65,15 @@ if [[ -f $exclude ]]; then
     done
 fi
 
-# 2. Macros
-if [[ -e $LINK_NAME && ! -L $LINK_NAME ]]; then
-    die "$LINK_NAME exists and is not a link; move it away first"
-fi
-ln -sfn "$REPO_DIR/macros" "$LINK_NAME"
-echo "linked $LINK_NAME"
+# 2. Macros and scripts, visible and editable in Mainsail/Fluidd
+for pair in "macros:$LINK_NAME" "scripts:$SCRIPTS_LINK"; do
+    src="$REPO_DIR/${pair%%:*}" link="${pair#*:}"
+    if [[ -e $link && ! -L $link ]]; then
+        die "$link exists and is not a link; move it away first"
+    fi
+    ln -sfn "$src" "$link"
+    echo "linked $link"
+done
 
 # 3. Scripts
 find "$REPO_DIR/macros" "$REPO_DIR/scripts" -name "*.sh" -exec chmod +x {} +
@@ -92,7 +99,8 @@ fi
 cat <<EOF
 
 Done. Next steps (see README.md):
-  1. add to printer.cfg:   [include klipper-macros/klipper-macros.cfg]
+  1. add to printer.cfg, after [include AFC/*.cfg]:
+       [include klipper-macros/klipper-macros.cfg]
      and remove the old includes of the same macro files
   2. restart the Klipper SERVICE (not just RESTART), so the new Python
      modules are loaded:   sudo systemctl restart klipper