RESPOND TYPE=command MSG="action:prompt_text You can close this window: the run continues. The status line shows the progress, and a window opens with the result."
RESPOND TYPE=command MSG="action:prompt_footer_button Stop the run|TWIST_STOP|error"
RESPOND TYPE=command MSG="action:prompt_text Checks that the nozzle and the Beacon agree across the bed. Run it after work on the X rail, carriage, toolhead, belts or Beacon mount, or when first layers differ left vs right."
RESPOND TYPE=command MSG="action:prompt_text Measure (25 min): measures and tells you whether new values are needed. Start here."
RESPOND TYPE=command MSG="action:prompt_text Verify (17 min): checks the active values with bd_pressure. Run it after applying new values."
description: Twist calibration: what to check before starting
gcode:
{% set mode=params.MODE|default('measure')|lower %}
{% set bed = printer.heater_bed.temperature %}
RESPOND TYPE=command MSG="action:prompt_begin Before you start {mode}"
RESPOND TYPE=command MSG="action:prompt_text 1. Nothing on the bed: no parts, no tools, plate seated."
RESPOND TYPE=command MSG="action:prompt_text 2. Nozzle clean, no blob: it touches the bed at every point."
RESPOND TYPE=command MSG="action:prompt_text 3. Keep hands out of the printer while it runs."
{% if bed > 40 %}
RESPOND TYPE=command MSG="action:prompt_text Note: the bed is at {bed|int} C. The reference runs were on a cold bed, so wait for it to cool unless you want this on purpose."
RESPOND TYPE=command MSG="action:prompt_text It heats the nozzle to 150 C, homes, levels, wipes the nozzle on the brush and takes {'25' if mode == 'measure' else '17'} minutes. The configuration is not changed."
RESPOND TYPE=command MSG="action:prompt_text You can close this window: the run continues. The status line shows the progress, and a window opens with the result."
RESPOND TYPE=command MSG="action:prompt_footer_button Stop the run|TWIST_STOP|error"