klipper-macros/CLAUDE.md

# klipper-macros

Klipper macros, Klipper modules and scripts for one printer, installed on
the printer's Raspberry Pi with `install.sh` and updated through Moonraker.
See README.md for the user-facing description.

## The printer

Voron 2.4 350, Klipper + Moonraker + Mainsail on a Raspberry Pi 4
(`http://mainsailos.local`, Moonraker API on port 80). AFC Box Turtle with
5 lanes, Blobifier purge bucket, Beacon (Z homing and probing), Nitehawk-SB
toolboard (USB), Leviathan mainboard as USB-CAN bridge, bd_pressure
(load-check firmware, branch `load-check-extension` in
`D:\Claude\bd_pressure-load-check\bd_pressure`), bdwidth (measures width and
motion optically with a CCD; its motion reading stays at 0, so it runs width
only (`ENABLE_WIDTH` in PRINT_START) and the purge check runs with
`motion_check: False`; clogs and breaks are caught by AFC's buffer fault
detection, `filament_error_sensitivity`), iHeater chamber heater.

## Working with the printer

- Read freely through Moonraker: `GET /server/files/config/<path>`,
  `/server/files/logs/klippy.log`, `/printer/objects/query?...`,
  `/server/gcode_store`. The merged config Klipper loaded is in klippy.log
  after `===== Config file =====`.
- Do **not** change anything on the printer (upload files, edit config, send
  G-code, restart services) unless the user asks for that specific action.
  Prepare files here and let the user upload them.
- Never run anything that moves the printer or heats while a print may be
  running; check `print_stats.state` first.

## Repo layout

- `macros/klipper-macros.cfg` is the only file `printer.cfg` includes; it
  includes everything else. It must be included after `[include AFC/*.cfg]`
  (a `rename_existing` of an AFC command only works if AFC loaded first).
  On the Pi, `macros/` is linked as `~/printer_data/config/klipper-macros/`
  and `scripts/` as `~/printer_data/config/klipper-macros-scripts/`.
- `extras/*.py` are linked into `~/klipper/klippy/extras/`.
- `scripts/` MCU firmware update scripts (printer-specific IDs).
- `tools/effective_config.py` expands the includes like Klipper and compares
  the result between git refs.

## Rules for macro changes

- **Never define the same `[gcode_macro X]` in two files.** Klipper merges
  sections with the same name and the later file wins completely (this is
  how heat_soak.cfg's RESUME silently replaced the real RESUME). Include
  order in `klipper-macros.cfg` matters for this.
- `RESUME` and `PAUSE` are defined only in `print/pause_resume.cfg`. AFC
  renames PAUSE/RESUME at startup and wraps them:
  `PAUSE -> AFC_PAUSE -> PAUSE -> PAUSE_BASE`,
  `RESUME -> AFC_RESUME -> RESUME -> HEAT_SOAK_RESUME -> _RESUME_PRINT -> RESUME_BASE`.
  After a PAUSE, `_RESUME_PRINT` first purges with `BLOBIFIER_CHECKED`
  (`_RESUME_PURGE`); a failed check raises an error, which aborts the whole
  chain (AFC_RESUME's restore too), so the printer stays paused.
- Only one `[save_variables]`, in `macros/save_variables.cfg`.
- `PRINT_END` and `CANCEL_PRINT` share `_PRINT_CLEANUP` (heaters including
  `iHEATER_OFF`, fan, `M221 S100`, bdwidth off). Anything that must happen
  at the end of every print goes there. `RESTORE_GCODE_STATE` restores the
  flow (M221), so reset flow after it, not before.
- Do not use `G10`/`G11` in macros: Klipper's `G10` retracts only once until
  a `G11`, and nothing on this printer sends `G11`. Use `_NOZZLE_RETRACT`
  (remembered in the saved variable `nozzle_retract`); `PRINT_START` undoes
  it over the bucket with `_NOZZLE_UNRETRACT`.
- Inside `gcode:` use `;` for comments on G-code lines; `#` lines are
  stripped by the config parser.
- After a refactor run `python tools/effective_config.py HEAD` and check that
  only the intended sections changed.
- Render-test macros with Jinja2 using Klipper's delimiters
  (`jinja2.Environment('{%', '%}', '{', '}')`) and mocked `printer` objects.

## Rules for the Python modules (`extras/`)

- Klipper only loads changed `.py` files when the **Klipper service**
  restarts (`sudo systemctl restart klipper`); `RESTART` and
  `FIRMWARE_RESTART` keep the old code in memory.
- Event handlers must never raise: an exception in a handler shuts Klipper
  down. Example: Beacon sends `homing:home_rails_end` with `rails=[]` and a
  homing state whose `get_trigger_position` raises.
- Keep them read-only wrappers where possible (look up the other module's
  object, do not patch third-party files).

## Reference values

- Purge check (150 mm Blobifier purge): good load = longest pressure
  13-18 s, peak 64-181; empty nozzle about 30 ms.
- XY drift check: endstop noise about 0.01-0.02 mm; limit 0.1 mm (one motor
  skipping one cycle = 0.4 mm shows as 0.2 mm in X and Y).

## Git

- LF line endings everywhere (`.gitattributes`); the files run on Linux.
- Commit only when the user says so; never push without asking. Remote:
  `https://mangavalk.com/mangavalk/klipper-macros.git`.