Files
esphome-wake-up-light-ii/patches/wbr3-pa13-pa14-uart.patch
T
mangavalkandClaude Opus 5.5 1457e25d98 Update the patched UART component to ESPHome 2026.11.0
ESPHome 2026.11's tuya component calls uart.new_uart_component(), which the
2026.10.2 copy didn't have, so the build failed. Copy the UART component from
2026.11.0, reapply the PA13/PA14 patch, regenerate the patch file and point
the refs at v1.0.6.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-19 00:31:45 +01:00

25 lines
911 B
Diff

--- a/esphome/components/uart/uart_component_libretiny.cpp
+++ b/esphome/components/uart/uart_component_libretiny.cpp
@@ -74,7 +74,9 @@
return;
}
#if LT_HW_UART0
- else if ((tx_pin == -1 || tx_pin == PIN_SERIAL0_TX) && (rx_pin == -1 || rx_pin == PIN_SERIAL0_RX) &&
+ else if ((((tx_pin == -1 || tx_pin == PIN_SERIAL0_TX) &&
+ (rx_pin == -1 || rx_pin == PIN_SERIAL0_RX)) ||
+ (tx_pin == 14 && rx_pin == 13)) &&
!should_fallback_to_software_serial()) {
this->serial_ = &Serial0;
this->hardware_idx_ = 0;
@@ -124,6 +126,10 @@
if (this->hardware_idx_ >= 0)
libretiny::ensure_serial_handle(this->hardware_idx_);
+ if (this->hardware_idx_ == 0 && tx_pin == 14 && rx_pin == 13) {
+ ESP_LOGI(TAG, "Using alternate UART0 pins RX=PA13 TX=PA14");
+ Serial0.setPins(rx_pin, tx_pin);
+ }
this->serial_->begin(this->baud_rate_, get_config());
}