esphome-wake-up-light-ii/components/uart/uart_component.h

#pragma once

#include <vector>
#include <cstdint>
#include <cstring>
#include "esphome/core/defines.h"
#include "esphome/core/component.h"
#include "esphome/core/hal.h"
#include "esphome/core/log.h"
#include "esphome/core/helpers.h"
#ifdef USE_UART_DEBUGGER
#include "esphome/core/automation.h"
#endif

namespace esphome::uart {

enum UARTParityOptions {
  UART_CONFIG_PARITY_NONE,
  UART_CONFIG_PARITY_EVEN,
  UART_CONFIG_PARITY_ODD,
  // Only USB serial adapters (usb_uart) support these
  UART_CONFIG_PARITY_MARK,
  UART_CONFIG_PARITY_SPACE,
};

#ifdef USE_UART_DEBUGGER
enum UARTDirection {
  UART_DIRECTION_RX,
  UART_DIRECTION_TX,
  UART_DIRECTION_BOTH,
};
#endif

const LogString *parity_to_str(UARTParityOptions parity);

/// Result of a flush() call.
enum class UARTFlushResult {
  UART_FLUSH_RESULT_SUCCESS,          ///< Confirmed: all bytes left the TX FIFO.
  UART_FLUSH_RESULT_TIMEOUT,          ///< Confirmed: timed out before TX completed.
  UART_FLUSH_RESULT_FAILED,           ///< Confirmed: driver or hardware error.
  UART_FLUSH_RESULT_ASSUMED_SUCCESS,  ///< Platform cannot report result; success is assumed.
};

class UARTComponent {
 public:
  static constexpr size_t RX_FULL_THRESHOLD_UNSET = 0;

  // Writes an array of bytes to the UART bus.
  // @param data A vector of bytes to be written.
  void write_array(const std::vector<uint8_t> &data) { this->write_array(&data[0], data.size()); }

  // Writes a single byte to the UART bus.
  // @param data The byte to be written.
  void write_byte(uint8_t data) { this->write_array(&data, 1); };

  // Writes a null-terminated string to the UART bus.
  // @param str Pointer to the null-terminated string.
  void write_str(const char *str) {
    const auto *data = reinterpret_cast<const uint8_t *>(str);
    this->write_array(data, strlen(str));
  };

  // Pure virtual method to write an array of bytes to the UART bus.
  // @param data Pointer to the array of bytes.
  // @param len Length of the array.
  virtual void write_array(const uint8_t *data, size_t len) = 0;

  // Reads a single byte from the UART bus.
  // @param data Pointer to the byte where the read data will be stored.
  // @return True if a byte was successfully read, false otherwise.
  bool read_byte(uint8_t *data) { return this->read_array(data, 1); };

  // Pure virtual method to peek the next byte in the UART buffer without removing it.
  // @param data Pointer to the byte where the peeked data will be stored.
  // @return True if a byte is available to peek, false otherwise.
  virtual bool peek_byte(uint8_t *data) = 0;

  // Pure virtual method to read an array of bytes from the UART bus.
  // @param data Pointer to the array where the read data will be stored.
  // @param len Number of bytes to read.
  // @return True if the specified number of bytes were successfully read, false otherwise.
  virtual bool read_array(uint8_t *data, size_t len) = 0;

  // Pure virtual method to return the number of bytes available for reading.
  // @return Number of available bytes.
  virtual size_t available() = 0;

  // Returns how many bytes write_array() accepts right now without blocking.
  // Platforms that cannot tell return SIZE_MAX: write_array() takes everything and may block.
  virtual size_t available_for_write() { return SIZE_MAX; }

  // Pure virtual method to block until all bytes have been written to the UART bus.
  // @return UARTFlushResult indicating whether the flush was confirmed, timed out, failed, or assumed successful.
  virtual UARTFlushResult flush() = 0;

  // Returns true if the underlying transport is connected and operational.
  // Hardware UARTs always return true. USB-backed UARTs override to reflect actual connection state.
  virtual bool is_connected() { return true; }

  // Sets the maximum time to wait for TX to drain during flush().
  // Only meaningful on ESP32 (IDF). Other platforms ignore this value.
  // @param flush_timeout_ms Timeout in milliseconds; 0 means wait indefinitely.
  virtual void set_flush_timeout(uint32_t flush_timeout_ms) {}

  // Sets the TX (transmit) pin for the UART bus.
  // @param tx_pin Pointer to the internal GPIO pin used for transmission.
  void set_tx_pin(InternalGPIOPin *tx_pin) { this->tx_pin_ = tx_pin; }

  // Sets the RX (receive) pin for the UART bus.
  // @param rx_pin Pointer to the internal GPIO pin used for reception.
  void set_rx_pin(InternalGPIOPin *rx_pin) { this->rx_pin_ = rx_pin; }

  // Sets the flow control pin for the UART bus.
  // @param flow_control_pin Pointer to the internal GPIO pin used for flow control.
  void set_flow_control_pin(InternalGPIOPin *flow_control_pin) { this->flow_control_pin_ = flow_control_pin; }

  // Sets the size of the RX buffer.
  // @param rx_buffer_size Size of the RX buffer in bytes.
  void set_rx_buffer_size(size_t rx_buffer_size) { this->rx_buffer_size_ = rx_buffer_size; }

  // Gets the size of the RX buffer.
  // @return Size of the RX buffer in bytes.
  size_t get_rx_buffer_size() { return this->rx_buffer_size_; }

  // Sets the RX FIFO full interrupt threshold.
  // @param rx_full_threshold RX full interrupt threshold in bytes.
  virtual void set_rx_full_threshold(size_t rx_full_threshold) {}

  // Sets the RX FIFO full interrupt threshold.
  // @param time RX full interrupt threshold in ms.
  void set_rx_full_threshold_ms(uint8_t time);

  // Gets the RX FIFO full interrupt threshold.
  // @return RX full interrupt threshold in bytes.
  size_t get_rx_full_threshold() { return this->rx_full_threshold_; }

  // Sets the RX timeout interrupt threshold.
  // @param rx_timeout RX timeout interrupt threshold (unit: time of sending one byte).
  virtual void set_rx_timeout(size_t rx_timeout) {}

  // Gets the RX timeout interrupt threshold.
  // @return RX timeout interrupt threshold (unit: time of sending one byte).
  size_t get_rx_timeout() { return this->rx_timeout_; }

  // Sets the number of stop bits used in UART communication.
  // @param stop_bits Number of stop bits.
  void set_stop_bits(uint8_t stop_bits) { this->stop_bits_ = stop_bits; }

  // Gets the number of stop bits used in UART communication.
  // @return Number of stop bits.
  uint8_t get_stop_bits() const { return this->stop_bits_; }

  // Set the number of data bits used in UART communication.
  // @param data_bits Number of data bits.
  void set_data_bits(uint8_t data_bits) { this->data_bits_ = data_bits; }

  // Get the number of data bits used in UART communication.
  // @return Number of data bits.
  uint8_t get_data_bits() const { return this->data_bits_; }

  // Set the parity used in UART communication.
  // @param parity Parity option.
  void set_parity(UARTParityOptions parity) { this->parity_ = parity; }

  // Get the parity used in UART communication.
  // @return Parity option.
  UARTParityOptions get_parity() const { return this->parity_; }

  // Set the baud rate for UART communication.
  // @param baud_rate Baud rate in bits per second.
  void set_baud_rate(uint32_t baud_rate) { baud_rate_ = baud_rate; }

  // Get the baud rate for UART communication.
  // @return Baud rate in bits per second.
  uint32_t get_baud_rate() const { return baud_rate_; }

#if defined(USE_ESP8266) || defined(USE_ESP32)
  /**
   * Load the UART settings.
   * @param dump_config If true (default), output the new settings to logs; otherwise, change settings quietly.
   *
   * Example:
   * ```cpp
   * id(uart1).load_settings(false);
   * ```
   *
   * This will load the current UART interface with the latest settings (baud_rate, parity, etc).
   */
  virtual void load_settings(bool dump_config) = 0;

  /**
   * Load the UART settings.
   *
   * Example:
   * ```cpp
   * id(uart1).load_settings();
   * ```
   *
   * This will load the current UART interface with the latest settings (baud_rate, parity, etc).
   */
  void load_settings() { this->load_settings(true); }
#endif  // USE_ESP8266 || USE_ESP32

#ifdef USE_UART_DEBUGGER
  template<typename F> void add_debug_callback(F &&callback) { this->debug_callback_.add(std::forward<F>(callback)); }
#endif

 protected:
  virtual void check_logger_conflict() = 0;
  bool check_read_timeout_(size_t len = 1);

  InternalGPIOPin *tx_pin_{};
  InternalGPIOPin *rx_pin_{};
  InternalGPIOPin *flow_control_pin_{};
  size_t rx_buffer_size_{};
  // ESP32 (both Arduino and ESP-IDF) always sets this at codegen time via set_rx_full_threshold().
  // Other platforms (USB UART, Arduino, etc.) leave it unset.
  size_t rx_full_threshold_{RX_FULL_THRESHOLD_UNSET};
  size_t rx_timeout_{0};
  uint32_t baud_rate_{0};
  uint8_t stop_bits_{0};
  uint8_t data_bits_{0};
  UARTParityOptions parity_{UART_CONFIG_PARITY_NONE};  // Must match the parity check in __init__.py
#ifdef USE_UART_DEBUGGER
  CallbackManager<void(UARTDirection, uint8_t)> debug_callback_{};
#endif
};

}  // namespace esphome::uart