From e772c1a351deb72dda29fda215e64dece5a0624d Mon Sep 17 00:00:00 2001 From: MangaValk Date: Thu, 5 Nov 2026 18:28:30 +0100 Subject: [PATCH] Note confirmed ring duration and silent sound 0 Co-Authored-By: Claude Opus 5.5 --- CLAUDE.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/CLAUDE.md b/CLAUDE.md index 96442c1..78ca621 100644 --- a/CLAUDE.md +++ b/CLAUDE.md @@ -62,7 +62,8 @@ From Tuya's definition for a sibling product (tuya-local issue #3821). See the R - Byte 8 isn't per alarm. Every DP127 write sets all 4 to the current radio station, so there's no per-alarm station control. - Byte 10 is forced to 0 without the light bit, and writing 0 clears the light bit. - Byte 11: above 1 becomes 1. -- What byte 4 actually does to ring length isn't confirmed. A test ring wasn't observed stopping. +- Byte 4 is the ring length in minutes: set to 10, a ring ran from 18:16 to 18:26 and the owner saw it stop. +- Sound 0 is silent. In Sound + Light mode, the light still came on and no sound played. - Radio Volume and station writes are ignored with the radio off. With it on, both work, and the station stays selected after turning it off. - Keep `default_transition_length` at 0. A transition sends about 50 MCU writes a second. - LibreTiny before v1.14.0 can hang after a software restart or OTA until powered off for about 30 seconds (LibreTiny issue #396). The config pins v1.14.0. Drop the pin once ESPHome defaults to it or newer.