Name the alarm sounds

Replace Sound 1 to 7 with the names identified by ear on this lamp.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

CLAUDE.md

@@ -8,6 +8,7 @@ ESPHome firmware for a Moes Wake Up Light II (Tuya PID `ya39qahrcdhvxowz`), runn
 - `alarm_block.yaml`: controls for one alarm, included 4 times.
 - `alarm_day.yaml`: one weekday switch, included 7 times per alarm.
 - `components/uart`: ESPHome 2026.10.2's UART component with `patches/wbr3-pa13-pa14-uart.patch` applied. Recheck it when ESPHome updates.
+
 - `server-example.yaml`: the short YAML that goes on an ESPHome server.
 - `secrets.yaml`: local only, ignored by git. Needs `wifi_ssid`, `wifi_password`, `ap_password`, `api_encryption_key`.
 
@@ -64,7 +65,7 @@ From Tuya's definition for a sibling product (tuya-local issue #3821). See the R
 - Byte 11: above 1 becomes 1.
 - Byte 4 is the ring length in minutes: set to 10, a ring ran from 18:16 to 18:26 and the owner saw it stop.
 - Sound 0 is silent. In Sound + Light mode, the light still came on and no sound played.
-- Sound names, being tested one at a time: Sound 1 is birds chirping. Sounds 2 to 7 are still to do, then the names go into the sound selects.
+- Alarm sounds, identified by ear: 1 birds chirping, 2 beach (water and birds), 3 galaxy twinkles, 4 piano and birds, 5 happy harp or high piano, 6 old mechanical alarm clock, 7 old digital alarm clock. Names are in `alarm_block.yaml`. Sunset's sounds 1 to 4 haven't been checked, so they keep their numbers.
 - Radio Volume and station writes are ignored with the radio off. With it on, both work, and the station stays selected after turning it off.
 - Keep `default_transition_length` at 0. A transition sends about 50 MCU writes a second.
 - LibreTiny before v1.14.0 can hang after a software restart or OTA until powered off for about 30 seconds (LibreTiny issue #396). The config pins v1.14.0. Drop the pin once ESPHome defaults to it or newer.

alarm_block.yaml

@@ -117,13 +117,13 @@ select:
     name: "Alarm ${n} Sound"
     options:
       - "Off"
-      - "Sound 1"
+      - "Birds"
-      - "Sound 2"
+      - "Beach"
-      - "Sound 3"
+      - "Galaxy Twinkles"
-      - "Sound 4"
+      - "Piano and Birds"
-      - "Sound 5"
+      - "Happy Harp"
-      - "Sound 6"
+      - "Mechanical Alarm Clock"
-      - "Sound 7"
+      - "Digital Alarm Clock"
     update_interval: 2s
     web_server:
       sorting_group_id: group_alarm_${n}
@@ -131,20 +131,21 @@ select:
     lambda: |-
       if (!id(alarm_raw_valid)) return {};
       uint8_t s = id(alarm_raw)[${o} + 6];
-      if (s == 0) return std::string("Off");
+      static const char *const names[8] = {"Off", "Birds", "Beach", "Galaxy Twinkles", "Piano and Birds",
-      if (s >= 1 && s <= 7) return std::string("Sound ") + std::to_string(s);
+                                            "Happy Harp", "Mechanical Alarm Clock", "Digital Alarm Clock"};
-      return {};
+      if (s > 7) return {};
+      return std::string(names[s]);
     set_action:
       - lambda: |-
           if (!id(alarm_raw_valid)) return;
           uint8_t value = 0;
-          if (x == "Sound 1") value = 1;
+          if (x == "Birds") value = 1;
-          else if (x == "Sound 2") value = 2;
+          else if (x == "Beach") value = 2;
-          else if (x == "Sound 3") value = 3;
+          else if (x == "Galaxy Twinkles") value = 3;
-          else if (x == "Sound 4") value = 4;
+          else if (x == "Piano and Birds") value = 4;
-          else if (x == "Sound 5") value = 5;
+          else if (x == "Happy Harp") value = 5;
-          else if (x == "Sound 6") value = 6;
+          else if (x == "Mechanical Alarm Clock") value = 6;
-          else if (x == "Sound 7") value = 7;
+          else if (x == "Digital Alarm Clock") value = 7;
           id(alarm_raw)[${o} + 6] = value;
       - script.execute: send_alarm_settings
 

server-example.yaml

@@ -7,6 +7,6 @@ substitutions:
 packages:
   lamp:
     url: https://mangavalk.com/mangavalk/esphome-wake-up-light-ii.git
-    ref: v1.0.2
+    ref: v1.0.3
     files: [wake-up-light-ii.yaml]
     refresh: 1d

wake-up-light-ii.yaml

@@ -22,7 +22,7 @@ external_components:
   - source:
       type: git
       url: https://mangavalk.com/mangavalk/esphome-wake-up-light-ii.git
-      ref: v1.0.2
+      ref: v1.0.3
     components: [uart]
     refresh: 1d
 
@@ -268,7 +268,8 @@ tuya:
     # [03] repeat days: bit 0 = Monday ... bit 6 = Sunday, 0 = one time
     # [04] ring duration (Tuya says 10-20, this lamp reports 30; any value is kept)
     # [05] mode bits: bit 0=light, bit 1=radio. Values above 3 are ignored.
-    # [06] sound 0..7. Writing 8 or more turns on the radio bit and resets it to 1.
+    # [06] sound 0..7, named in alarm_block.yaml. Writing 8 or more turns on the
+    #      radio bit and resets it to 1.
     #      Locked at 1 in radio modes.
     # [07] volume 1..16 (any value is kept)
     # [08] radio station. Not per alarm: every write sets all 4 to the current