Update the patched UART component to ESPHome 2026.11.0
ESPHome 2026.11's tuya component calls uart.new_uart_component(), which the 2026.10.2 copy didn't have, so the build failed. Copy the UART component from 2026.11.0, reapply the PA13/PA14 patch, regenerate the patch file and point the refs at v1.0.6. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
bcc6b3a42b
commit
1457e25d98
39 files changed
+907
-304
No files matched your search
@@ -1,26 +1,24 @@
|
||||
--- a/esphome/components/uart/uart_component_libretiny.cpp
|
||||
+++ b/esphome/components/uart/uart_component_libretiny.cpp
|
||||
@@ -64,8 +64,10 @@ void LibreTinyUARTComponent::setup() {
|
||||
@@ -74,7 +74,9 @@
|
||||
return;
|
||||
}
|
||||
#if LT_HW_UART0
|
||||
- else if ((tx_pin == -1 || tx_pin == PIN_SERIAL0_TX) && (rx_pin == -1 || rx_pin == PIN_SERIAL0_RX) &&
|
||||
- !should_fallback_to_software_serial()) {
|
||||
+ else if ((((tx_pin == -1 || tx_pin == PIN_SERIAL0_TX) &&
|
||||
+ (rx_pin == -1 || rx_pin == PIN_SERIAL0_RX)) ||
|
||||
+ (tx_pin == 14 && rx_pin == 13)) &&
|
||||
+ !should_fallback_to_software_serial()) {
|
||||
!should_fallback_to_software_serial()) {
|
||||
this->serial_ = &Serial0;
|
||||
this->hardware_idx_ = 0;
|
||||
}
|
||||
@@ -111,6 +113,10 @@ void LibreTinyUARTComponent::setup() {
|
||||
return;
|
||||
#endif
|
||||
}
|
||||
@@ -124,6 +126,10 @@
|
||||
|
||||
if (this->hardware_idx_ >= 0)
|
||||
libretiny::ensure_serial_handle(this->hardware_idx_);
|
||||
+ if (this->hardware_idx_ == 0 && tx_pin == 14 && rx_pin == 13) {
|
||||
+ ESP_LOGI(TAG, "Using alternate UART0 pins RX=PA13 TX=PA14");
|
||||
+ Serial0.setPins(rx_pin, tx_pin);
|
||||
+ }
|
||||
this->serial_->begin(this->baud_rate_, get_config());
|
||||
}
|
||||
void LibreTinyUARTComponent::dump_config() {
|
||||
|
||||
Reference in new issue
Block a user