esphome-wake-up-light-ii/wake-up-light-ii.yaml

###############################################################################
# Wake Up Light II -> ESPHome
# Tuya PID: ya39qahrcdhvxowz
# Hardware observed in this unit: Tuya WBR3 / Realtek RTL8720CF
# Main appliance MCU <-> WBR3: TuyaMCU protocol, UART0, 9600 8N1
#   WBR3 PA13 = RX0 (from appliance MCU)
#   WBR3 PA14 = TX0 (to appliance MCU)
#
# Stock ESPHome/LibreTiny UART selection may not route UART0 to PA13/PA14 on
# WBR3, so this config loads the patched UART component in components/uart
# (patches/wbr3-pa13-pa14-uart.patch applied to ESPHome 2026.10.2).
###############################################################################

substitutions:
  device_name: wake-up-light-ii
  friendly_name: "Wake Up Light II"
  ap_ssid: "Wake-Up-Light-II"
  timezone: "Europe/Berlin"   # Change to your IANA timezone.

# Patched UART component. Keep ref equal to the tag this file is released under.
external_components:
  - source:
      type: git
      url: https://mangavalk.com/mangavalk/esphome-wake-up-light-ii.git
      ref: v1.0.0
    components: [uart]
    refresh: 1d

# Controls for each alarm live in alarm_block.yaml.
packages:
  alarm_1: !include { file: alarm_block.yaml, vars: { n: "1", o: "0", dp: "109" } }
  alarm_2: !include { file: alarm_block.yaml, vars: { n: "2", o: "12", dp: "122" } }
  alarm_3: !include { file: alarm_block.yaml, vars: { n: "3", o: "24", dp: "123" } }
  alarm_4: !include { file: alarm_block.yaml, vars: { n: "4", o: "36", dp: "124" } }

esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}

rtl87xx:
  board: wbr3
  # v1.14.0 fixes the restart hang after OTA (LibreTiny issue #396). Drop this
  # once ESPHome's default framework version is 1.14.0 or newer.
  framework:
    version: 1.14.0
    source: https://github.com/libretiny-eu/libretiny.git#v1.14.0

# Disable serial logging: PA13/PA14 belong to the Tuya MCU link.
logger:
  baud_rate: 0
  level: DEBUG

uart:
  id: tuya_uart
  rx_pin: PA13
  tx_pin: PA14
  baud_rate: 9600
  data_bits: 8
  parity: NONE
  stop_bits: 1

  # Useful while reverse-engineering additional datapoints:
  # debug:
  #   direction: BOTH

###############################################################################
# Cached state
###############################################################################

globals:
  # DP127 is 48 bytes on this unit: 4 alarm blocks of 12 bytes. Never build it
  # from scratch: cache what the appliance MCU reported and only edit known bytes.
  - id: alarm_raw
    type: uint8_t[48]
    restore_value: no

  - id: alarm_raw_valid
    type: bool
    restore_value: no
    initial_value: 'false'

  - id: lamp_clock_hour
    type: uint8_t
    restore_value: no
    initial_value: '0'

  - id: lamp_clock_minute
    type: uint8_t
    restore_value: no
    initial_value: '0'

  - id: lamp_clock_second
    type: uint8_t
    restore_value: no
    initial_value: '0'

  - id: lamp_clock_valid
    type: bool
    restore_value: no
    initial_value: 'false'

  # DP128: sunset settings, 10 bytes. Cached and edited like DP127.
  - id: sunset_raw
    type: uint8_t[10]
    restore_value: no

  - id: sunset_raw_valid
    type: bool
    restore_value: no
    initial_value: 'false'

  # DP107: stations found by a scan, and the current station.
  - id: radio_total
    type: uint8_t
    restore_value: no
    initial_value: '0'

  - id: radio_current
    type: uint8_t
    restore_value: no
    initial_value: '0'

  - id: radio_valid
    type: bool
    restore_value: no
    initial_value: 'false'

  # Knocks counted in the current pattern window.
  - id: knock_count
    type: int
    restore_value: no
    initial_value: '0'

  - id: bedtime_start_brightness
    type: float
    restore_value: no
    initial_value: '0'

  # Last display state the schedule applied: -1 none, 0 day, 1 night.
  - id: display_schedule_last
    type: int
    restore_value: no
    initial_value: '-1'

###############################################################################
# Optional network time
#
# SNTP works only if the lamp can reach an NTP server. In AP-only operation
# there is no upstream network, so use the writable "Lamp Clock" control.
###############################################################################

time:
  - platform: sntp
    id: network_time
    timezone: ${timezone}
    servers:
      - 0.pool.ntp.org
      - 1.pool.ntp.org
      - 2.pool.ntp.org
    update_interval: 1h

    on_time_sync:
      then:
        - delay: 2s
        - script.execute: sync_lamp_clock
        - script.execute: apply_display_schedule

    on_time:
      - seconds: 0
        minutes: 0
        then:
          - script.execute: sync_lamp_clock
      - seconds: 0
        then:
          - script.execute: apply_display_schedule

###############################################################################
# Tuya MCU
###############################################################################

tuya:
  id: tuya_mcu
  time_id: network_time

  on_datapoint_update:
    # DP103: ASCII HHMMSS, for example "173700" = 17:37:00.
    - sensor_datapoint: 103
      datapoint_type: string
      then:
        - lambda: |-
            if (x.size() != 6) return;
            auto d = [](char c) -> int { return (c >= '0' && c <= '9') ? c - '0' : -1; };
            int h1=d(x[0]), h2=d(x[1]), m1=d(x[2]), m2=d(x[3]), s1=d(x[4]), s2=d(x[5]);
            if (h1 < 0 || h2 < 0 || m1 < 0 || m2 < 0 || s1 < 0 || s2 < 0) return;
            uint8_t hh = h1 * 10 + h2;
            uint8_t mm = m1 * 10 + m2;
            uint8_t ss = s1 * 10 + s2;
            if (hh > 23 || mm > 59 || ss > 59) return;
            id(lamp_clock_hour) = hh;
            id(lamp_clock_minute) = mm;
            id(lamp_clock_second) = ss;
            id(lamp_clock_valid) = true;
            char buf[16];
            snprintf(buf, sizeof(buf), "%02u:%02u:%02u", hh, mm, ss);
            id(clock_time_text).publish_state(buf);

    # DP107: [0] stations found by a scan (0 = none yet), [1] current station.
    - sensor_datapoint: 107
      datapoint_type: raw
      then:
        - lambda: |-
            id(radio_station_raw).publish_state(format_hex_pretty(x));
            if (x.size() != 2) return;
            id(radio_total) = x[0];
            id(radio_current) = x[1];
            id(radio_valid) = true;
            id(radio_stations_found).publish_state(x[0]);

    # Keep cached DP127 enable bytes coherent when the dedicated enable DPs move.
    - sensor_datapoint: 109
      datapoint_type: bool
      then:
        - lambda: |-
            if (id(alarm_raw_valid)) id(alarm_raw)[0] = x ? 1 : 0;
            id(publish_alarm_summaries).execute();

    - sensor_datapoint: 122
      datapoint_type: bool
      then:
        - lambda: |-
            if (id(alarm_raw_valid)) id(alarm_raw)[12] = x ? 1 : 0;
            id(publish_alarm_summaries).execute();

    - sensor_datapoint: 123
      datapoint_type: bool
      then:
        - lambda: |-
            if (id(alarm_raw_valid)) id(alarm_raw)[24] = x ? 1 : 0;
            id(publish_alarm_summaries).execute();

    - sensor_datapoint: 124
      datapoint_type: bool
      then:
        - lambda: |-
            if (id(alarm_raw_valid)) id(alarm_raw)[36] = x ? 1 : 0;
            id(publish_alarm_summaries).execute();

    # DP127: alarm configuration, 48 bytes on this unit: 4 blocks of 12 bytes,
    # Alarm 1 at offset 0, 2 at 12, 3 at 24, 4 at 36. Layout per Tuya's data
    # model for this family (tuya-local issue #3821):
    # [00] enabled
    # [01:02] time = minutes since midnight, big-endian
    # [03] repeat days: bit 0 = Monday ... bit 6 = Sunday, 0 = one time
    # [04] ring duration (Tuya says 10-20, this lamp reports 30)
    # [05] mode: 0=sound, 1=sound+light, 2=radio, 3=radio+light
    # [06] sound (this project also observed 8=FM)
    # [07] sound volume 1..16
    # [08] radio station 1..60
    # [09] sunrise lead time in minutes, 10..60
    # [10] brightness after sunrise, 1..20
    # [11] snooze: 0=allowed, 1=not allowed
    - sensor_datapoint: 127
      datapoint_type: raw
      then:
        - lambda: |-
            id(alarm_settings_raw).publish_state(format_hex_pretty(x));
            if (x.size() != 48) {
              ESP_LOGW("alarm", "Unexpected DP127 size: %u", (unsigned) x.size());
              return;
            }
            for (size_t i = 0; i < 48; i++) id(alarm_raw)[i] = x[i];
            id(alarm_raw_valid) = true;
            id(publish_alarm_summaries).execute();

    # DP128: sunset settings, 10 bytes, per Tuya's data model:
    # [0] switch (unused) [1] mode: 0=sound, 1=sound+light, 2=radio, 3=radio+light
    # [2] sound 1..4 [3] sound volume 1..16 [4] sound duration 10..120
    # [5] radio station 1..60 [6] radio duration 10..120
    # [7] starting brightness 1..20 [8] sunset duration 10..120
    # [9] snooze: 0=allowed, 1=not allowed
    # Bytes 4, 6 and 8 are kept equal, as Tuya's definition asks.
    - sensor_datapoint: 128
      datapoint_type: raw
      then:
        - lambda: |-
            id(sunset_settings_raw).publish_state(format_hex_pretty(x));
            if (x.size() != 10) {
              ESP_LOGW("sunset", "Unexpected DP128 size: %u", (unsigned) x.size());
              return;
            }
            for (size_t i = 0; i < 10; i++) id(sunset_raw)[i] = x[i];
            id(sunset_raw_valid) = true;


###############################################################################
# Helper scripts
###############################################################################

script:
  # A knock asks the lamp's MCU to snooze (DP130). Forced because the MCU may
  # leave DP130 on, and a normal write is skipped when the value looks unchanged.
  # Mode single plus the delay ignores repeat knocks for 3 seconds.
  - id: knock_snooze
    mode: single
    then:
      - lambda: |-
          ESP_LOGI("knock", "Sending snooze (DP130)");
          id(tuya_mcu).force_set_boolean_datapoint_value(130, true);
      - delay: 3s

  # Restarted by every knock, so this runs once the knocking has stopped.
  # Exactly two knocks toggle the light; any other count does nothing here.
  - id: knock_pattern
    mode: restart
    then:
      - delay: 800ms
      - lambda: |-
          int count = id(knock_count);
          id(knock_count) = 0;
          ESP_LOGI("knock", "Knock pattern finished: %d", count);
          if (count == 2 && id(double_knock_light).state) {
            id(main_light).toggle().perform();
          }

  # Writes the display mode only when the schedule crosses into day or night,
  # so changing Clock Display by hand holds until the next crossing.
  - id: apply_display_schedule
    mode: restart
    then:
      - lambda: |-
          if (!id(display_schedule_enabled).state) return;
          auto now = id(network_time).now();
          if (!now.is_valid()) return;
          int start = id(display_night_start).hour * 60 + id(display_night_start).minute;
          int end = id(display_night_end).hour * 60 + id(display_night_end).minute;
          int cur = now.hour * 60 + now.minute;
          bool night;
          if (start == end) night = false;
          else if (start < end) night = cur >= start && cur < end;
          else night = cur >= start || cur < end;
          int state = night ? 1 : 0;
          if (state == id(display_schedule_last)) return;
          id(display_schedule_last) = state;
          // DP104: 0=off, 1=day, 2=night, 3=auto.
          int value;
          if (night) value = id(display_night_level).active_index().value_or(1) == 0 ? 0 : 2;
          else value = id(display_day_level).active_index().value_or(0) == 0 ? 1 : 3;
          ESP_LOGI("display", "Schedule: %s, setting DP104 to %d", night ? "night" : "day", value);
          id(tuya_mcu).set_integer_datapoint_value(104, value);

  # 30 steps over the chosen length. Mode restart means pressing start again
  # begins a new fade from the current brightness.
  - id: bedtime_fade
    mode: restart
    then:
      - lambda: |-
          float b = 0.0f;
          id(main_light).remote_values.as_brightness(&b);
          id(bedtime_start_brightness) = b;
      - repeat:
          count: 30
          then:
            - delay: !lambda 'return static_cast<uint32_t>(id(bedtime_fade_minutes).state) * 2000;'
            - lambda: |-
                if (!id(main_light).remote_values.is_on()) return;
                float b = id(bedtime_start_brightness) * (29 - iteration) / 30.0f;
                auto call = id(main_light).make_call();
                if (iteration >= 29 || b < 0.02f) call.set_state(false);
                else call.set_brightness(b);
                call.set_transition_length(0);
                call.perform();

  - id: radio_sleep
    mode: restart
    then:
      - delay: !lambda 'return static_cast<uint32_t>(id(radio_sleep_minutes).state) * 60000;'
      - switch.turn_off: fm_radio

  - id: publish_alarm_summaries
    mode: restart
    then:
      - lambda: |-
          if (!id(alarm_raw_valid)) return;
          text_sensor::TextSensor *summaries[4] = {
            id(alarm_1_summary), id(alarm_2_summary), id(alarm_3_summary), id(alarm_4_summary)};
          static const char *const modes[4] = {"sound", "sound+light", "radio", "radio+light"};
          for (int n = 0; n < 4; n++) {
            const uint8_t *b = id(alarm_raw) + n * 12;
            uint16_t mins = (static_cast<uint16_t>(b[1]) << 8) | b[2];
            char buf[120];
            snprintf(buf, sizeof(buf),
              "%s %02u:%02u days=0x%02X %s sound=%u vol=%u station=%u sunrise=%u min light=%u/20 ring=%u min",
              b[0] ? "ON" : "OFF", mins / 60, mins % 60, b[3], b[5] < 4 ? modes[b[5]] : "?", b[6], b[7], b[8],
              b[9], b[10], b[4]);
            summaries[n]->publish_state(buf);
          }

  # The MCU echoes every write and that echo refreshes the cache, so wait for
  # quick changes to finish and send them together.
  - id: send_sunset_settings
    mode: restart
    then:
      - delay: 500ms
      - lambda: |-
          if (!id(sunset_raw_valid)) {
            ESP_LOGW("sunset", "DP128 has not been received yet; refusing to overwrite it");
            return;
          }
          std::vector<uint8_t> data(id(sunset_raw), id(sunset_raw) + 10);
          id(tuya_mcu).set_raw_datapoint_value(128, data);

  - id: send_alarm_settings
    mode: restart
    then:
      - delay: 500ms
      - lambda: |-
          if (!id(alarm_raw_valid)) {
            ESP_LOGW("alarm", "DP127 has not been received yet; refusing to overwrite it");
            return;
          }
          std::vector<uint8_t> data(id(alarm_raw), id(alarm_raw) + 48);
          ESP_LOGD("alarm", "Writing DP127: %s", format_hex_pretty(data).c_str());
          id(tuya_mcu).set_raw_datapoint_value(127, data);

  - id: sync_lamp_clock
    mode: restart
    then:
      - lambda: |-
          auto now = id(network_time).now();
          if (!now.is_valid()) {
            ESP_LOGW("clock", "No valid network time; use the Lamp Clock control in the web UI");
            return;
          }
          char buf[7];
          snprintf(buf, sizeof(buf), "%02u%02u%02u", now.hour, now.minute, now.second);
          ESP_LOGI("clock", "Syncing lamp clock to %s", buf);
          id(tuya_mcu).set_string_datapoint_value(103, std::string(buf));

###############################################################################
# Main lamp
###############################################################################

light:
  - platform: tuya
    id: main_light
    name: "Main Light"
    switch_datapoint: 101
    dimmer_datapoint: 102
    min_value: 10
    max_value: 1000
    gamma_correct: 1.0
    # Keep at 0: a transition here writes to the MCU on every loop, about 50
    # commands a second. Bedtime fade uses its own slow steps instead.
    default_transition_length: 0s
    web_server:
      sorting_group_id: group_light
      sorting_weight: 1

###############################################################################
# Clock and display schedule times
###############################################################################

datetime:
  - platform: template
    id: lamp_clock
    name: "Lamp Clock"
    type: time
    update_interval: 2s
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 1
    lambda: |-
      if (!id(lamp_clock_valid)) return {};
      ESPTime t{};
      t.hour = id(lamp_clock_hour);
      t.minute = id(lamp_clock_minute);
      t.second = id(lamp_clock_second);
      return t;
    set_action:
      - lambda: |-
          char buf[7];
          snprintf(buf, sizeof(buf), "%02u%02u%02u", x.hour, x.minute, x.second);
          ESP_LOGI("clock", "Setting lamp clock to %s", buf);
          id(tuya_mcu).set_string_datapoint_value(103, std::string(buf));

  - platform: template
    id: display_night_start
    name: "Display Night Start"
    type: time
    optimistic: true
    restore_value: true
    initial_value: "22:30:00"
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 11
    on_value:
      - lambda: id(display_schedule_last) = -1;
      - script.execute: apply_display_schedule

  - platform: template
    id: display_night_end
    name: "Display Night End"
    type: time
    optimistic: true
    restore_value: true
    initial_value: "07:00:00"
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 12
    on_value:
      - lambda: id(display_schedule_last) = -1;
      - script.execute: apply_display_schedule

###############################################################################
# Selects
###############################################################################

select:
  - platform: template
    id: sunset_mode_select
    name: "Sunset Type"
    options:
      - "Sound"
      - "Sound + Light"
      - "Radio"
      - "Radio + Light"
    update_interval: 2s
    web_server:
      sorting_group_id: group_sunset
      sorting_weight: 2
    lambda: |-
      if (!id(sunset_raw_valid)) return {};
      switch (id(sunset_raw)[1]) {
        case 0: return std::string("Sound");
        case 1: return std::string("Sound + Light");
        case 2: return std::string("Radio");
        case 3: return std::string("Radio + Light");
        default: return {};
      }
    set_action:
      - lambda: |-
          if (!id(sunset_raw_valid)) return;
          uint8_t value = 0;
          if (x == "Sound + Light") value = 1;
          else if (x == "Radio") value = 2;
          else if (x == "Radio + Light") value = 3;
          id(sunset_raw)[1] = value;
          // The MCU drops a light mode if brightness is 0, so give it a level.
          if ((value == 1 || value == 3) && id(sunset_raw)[7] == 0) id(sunset_raw)[7] = 15;
      - script.execute: send_sunset_settings

  - platform: template
    id: sunset_sound
    name: "Sunset Sound"
    options:
      - "Sound 1"
      - "Sound 2"
      - "Sound 3"
      - "Sound 4"
    update_interval: 2s
    web_server:
      sorting_group_id: group_sunset
      sorting_weight: 3
    lambda: |-
      if (!id(sunset_raw_valid)) return {};
      uint8_t s = id(sunset_raw)[2];
      if (s >= 1 && s <= 4) return std::string("Sound ") + std::to_string(s);
      return {};
    set_action:
      - lambda: |-
          if (!id(sunset_raw_valid)) return;
          uint8_t value = 1;
          if (x == "Sound 2") value = 2;
          else if (x == "Sound 3") value = 3;
          else if (x == "Sound 4") value = 4;
          id(sunset_raw)[2] = value;
      - script.execute: send_sunset_settings

  - platform: tuya
    id: clock_display_mode
    name: "Clock Display"
    int_datapoint: 104
    options:
      0: "Off"
      1: "Day"
      2: "Night"
      3: "Auto"
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 3

  - platform: template
    id: display_night_level
    name: "Display At Night"
    options:
      - "Off"
      - "Night"
    initial_option: "Night"
    optimistic: true
    restore_value: true
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 13
    on_value:
      - lambda: id(display_schedule_last) = -1;
      - script.execute: apply_display_schedule

  - platform: template
    id: display_day_level
    name: "Display In Daytime"
    options:
      - "Day"
      - "Auto"
    initial_option: "Day"
    optimistic: true
    restore_value: true
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 14
    on_value:
      - lambda: id(display_schedule_last) = -1;
      - script.execute: apply_display_schedule

  # Labels for these two come from Tuya's data model, not from testing.
  # This MCU reports both DPs as enums, so values count from 0.
  - platform: tuya
    id: snooze_action
    name: "Snooze Action"
    enum_datapoint: 117
    options:
      0: "Sound + Radio"
      1: "Light"
      2: "Radio"
      3: "Radio + Sound + Light"
    web_server:
      sorting_group_id: group_snooze
      sorting_weight: 3

  - platform: tuya
    id: ambient_color
    name: "Ambient Color"
    enum_datapoint: 132
    options:
      0: "Cycle"
      1: "Red"
      2: "Orange"
      3: "Yellow"
      4: "Green"
      5: "Cyan"
      6: "Blue"
      7: "Purple"
    web_server:
      sorting_group_id: group_light
      sorting_weight: 3

###############################################################################
# Numbers
###############################################################################

number:
  # Only meaningful after a Radio Scan has found stations.
  - platform: template
    id: radio_station
    name: "Radio Station"
    min_value: 1
    max_value: 60
    step: 1
    update_interval: 2s
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 2.5
    lambda: |-
      if (!id(radio_valid) || id(radio_current) == 0) return {};
      return static_cast<float>(id(radio_current));
    set_action:
      - lambda: |-
          if (!id(radio_valid) || id(radio_total) == 0) {
            ESP_LOGW("radio", "No stations found yet; run Radio Scan first");
            return;
          }
          uint8_t station = static_cast<uint8_t>(x);
          if (station > id(radio_total)) station = id(radio_total);
          std::vector<uint8_t> data = {id(radio_total), station};
          id(tuya_mcu).set_raw_datapoint_value(107, data);

  - platform: template
    id: sunset_volume
    name: "Sunset Volume"
    min_value: 1
    max_value: 16
    step: 1
    update_interval: 2s
    web_server:
      sorting_group_id: group_sunset
      sorting_weight: 4
    lambda: |-
      if (!id(sunset_raw_valid)) return {};
      return static_cast<float>(id(sunset_raw)[3]);
    set_action:
      - lambda: |-
          if (!id(sunset_raw_valid)) return;
          id(sunset_raw)[3] = static_cast<uint8_t>(x);
      - script.execute: send_sunset_settings

  - platform: template
    id: sunset_duration
    name: "Sunset Duration"
    unit_of_measurement: "min"
    min_value: 10
    max_value: 120
    step: 5
    update_interval: 2s
    web_server:
      sorting_group_id: group_sunset
      sorting_weight: 5
    lambda: |-
      if (!id(sunset_raw_valid)) return {};
      return static_cast<float>(id(sunset_raw)[8]);
    set_action:
      - lambda: |-
          if (!id(sunset_raw_valid)) return;
          uint8_t minutes = static_cast<uint8_t>(x);
          id(sunset_raw)[4] = minutes;
          id(sunset_raw)[6] = minutes;
          id(sunset_raw)[8] = minutes;
      - script.execute: send_sunset_settings

  - platform: template
    id: sunset_brightness
    name: "Sunset Start Brightness"
    min_value: 1
    max_value: 20
    step: 1
    update_interval: 2s
    web_server:
      sorting_group_id: group_sunset
      sorting_weight: 6
    lambda: |-
      if (!id(sunset_raw_valid)) return {};
      return static_cast<float>(id(sunset_raw)[7]);
    set_action:
      - lambda: |-
          if (!id(sunset_raw_valid)) return;
          id(sunset_raw)[7] = static_cast<uint8_t>(x);
      - script.execute: send_sunset_settings

  - platform: template
    id: sunset_radio_station
    name: "Sunset Radio Station"
    min_value: 1
    max_value: 60
    step: 1
    update_interval: 2s
    web_server:
      sorting_group_id: group_sunset
      sorting_weight: 7
    lambda: |-
      if (!id(sunset_raw_valid)) return {};
      return static_cast<float>(id(sunset_raw)[5]);
    set_action:
      - lambda: |-
          if (!id(sunset_raw_valid)) return;
          id(sunset_raw)[5] = static_cast<uint8_t>(x);
      - script.execute: send_sunset_settings

  - platform: tuya
    id: radio_volume
    name: "Radio Volume"
    number_datapoint: 106
    min_value: 1
    max_value: 16
    step: 1
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 2

  - platform: tuya
    id: snooze_duration
    name: "Snooze Duration"
    number_datapoint: 116
    unit_of_measurement: "min"
    min_value: 8
    max_value: 15
    step: 1
    web_server:
      sorting_group_id: group_snooze
      sorting_weight: 2

  - platform: template
    id: bedtime_fade_minutes
    name: "Bedtime Fade Length"
    unit_of_measurement: "min"
    min_value: 1
    max_value: 120
    step: 1
    initial_value: 30
    optimistic: true
    restore_value: true
    web_server:
      sorting_group_id: group_light
      sorting_weight: 5

  - platform: template
    id: radio_sleep_minutes
    name: "Radio Sleep Length"
    unit_of_measurement: "min"
    min_value: 5
    max_value: 180
    step: 5
    initial_value: 30
    optimistic: true
    restore_value: true
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 5

###############################################################################
# Switches
###############################################################################

switch:
  - platform: tuya
    id: fm_radio
    name: "FM Radio"
    switch_datapoint: 105
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 1

  - platform: tuya
    id: sunset_mode
    name: "Sunset / Sleep Mode"
    switch_datapoint: 121
    web_server:
      sorting_group_id: group_sunset
      sorting_weight: 1

  - platform: tuya
    id: ambient_light
    name: "Ambient Light"
    switch_datapoint: 129
    web_server:
      sorting_group_id: group_light
      sorting_weight: 2

  - platform: tuya
    id: clock_24_hour
    name: "24 Hour Clock"
    switch_datapoint: 131
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 4

  # Tuya's data model calls this online time synchronization.
  - platform: tuya
    id: network_time_switch
    name: "Network Time"
    switch_datapoint: 125
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 5

  - platform: template
    id: display_schedule_enabled
    name: "Display Night Schedule"
    optimistic: true
    restore_mode: RESTORE_DEFAULT_OFF
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 10
    on_turn_on:
      - lambda: id(display_schedule_last) = -1;
      - script.execute: apply_display_schedule

  - platform: template
    id: double_knock_light
    name: "Double Knock Toggles Light"
    optimistic: true
    restore_mode: RESTORE_DEFAULT_ON
    web_server:
      sorting_group_id: group_snooze
      sorting_weight: 5

###############################################################################
# Diagnostics / still-undecoded payloads
###############################################################################

text_sensor:
  - platform: template
    id: clock_time_text
    name: "Clock Time"
    update_interval: never
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 2

  - platform: template
    id: radio_station_raw
    name: "Radio Station Raw"
    update_interval: never
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 9

  - platform: template
    id: alarm_settings_raw
    name: "Alarm Settings Raw"
    update_interval: never
    web_server:
      sorting_group_id: group_device
      sorting_weight: 10

  - platform: template
    id: sunset_settings_raw
    name: "Sunset Settings Raw"
    update_interval: never
    web_server:
      sorting_group_id: group_device
      sorting_weight: 11

  - platform: wifi_info
    ip_address:
      name: "IP Address"
      web_server:
        sorting_group_id: group_device
        sorting_weight: 1

  - platform: debug
    reset_reason:
      name: "Last Restart Reason"
      web_server:
        sorting_group_id: group_device
        sorting_weight: 4

###############################################################################
# Device health
###############################################################################

debug:
  update_interval: 60s

sensor:
  - platform: template
    id: radio_stations_found
    name: "Radio Stations Found"
    accuracy_decimals: 0
    update_interval: never
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 8

  - platform: wifi_signal
    name: "WiFi Signal"
    update_interval: 60s
    web_server:
      sorting_group_id: group_device
      sorting_weight: 2

  - platform: uptime
    name: "Uptime"
    update_interval: 60s
    web_server:
      sorting_group_id: group_device
      sorting_weight: 3

###############################################################################
# Knock sensor: switch between 3.3V and PA18, active high
# One knock snoozes straight away. Exactly two knocks also toggle the light.
###############################################################################

binary_sensor:
  - platform: gpio
    name: "Knock"
    icon: "mdi:gesture-tap"
    pin:
      number: PA18
      mode:
        input: true
        pulldown: true
    web_server:
      sorting_group_id: group_snooze
      sorting_weight: 4
    filters:
      # Stretch short hits so Home Assistant sees them, and merge bounces into
      # one press.
      - delayed_off: 200ms
    on_press:
      - script.execute: knock_snooze
      - lambda: id(knock_count) += 1;
      - script.execute: knock_pattern

###############################################################################
# Buttons
###############################################################################

button:
  - platform: template
    name: "Snooze"
    icon: "mdi:alarm-snooze"
    web_server:
      sorting_group_id: group_snooze
      sorting_weight: 1
    on_press:
      - script.execute: knock_snooze

  - platform: template
    name: "Start Bedtime Fade"
    icon: "mdi:weather-night"
    web_server:
      sorting_group_id: group_light
      sorting_weight: 6
    on_press:
      - script.execute: bedtime_fade

  - platform: template
    name: "Cancel Bedtime Fade"
    icon: "mdi:cancel"
    web_server:
      sorting_group_id: group_light
      sorting_weight: 7
    on_press:
      - script.stop: bedtime_fade

  - platform: template
    name: "Sync Lamp Clock Now"
    icon: "mdi:clock-sync"
    web_server:
      sorting_group_id: group_clock
      sorting_weight: 6
    on_press:
      - script.execute: sync_lamp_clock

  # DP126: 1 starts a channel search, 0 ends it, per Tuya's data model.
  - platform: template
    name: "Radio Scan"
    icon: "mdi:radio-tower"
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 3
    on_press:
      - lambda: id(tuya_mcu).force_set_boolean_datapoint_value(126, true);

  - platform: template
    name: "Radio Scan Stop"
    icon: "mdi:stop"
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 4
    on_press:
      - lambda: id(tuya_mcu).force_set_boolean_datapoint_value(126, false);

  - platform: template
    name: "Start Radio Sleep Timer"
    icon: "mdi:timer-outline"
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 6
    on_press:
      - script.execute: radio_sleep

  - platform: template
    name: "Cancel Radio Sleep Timer"
    icon: "mdi:timer-off-outline"
    web_server:
      sorting_group_id: group_radio
      sorting_weight: 7
    on_press:
      - script.stop: radio_sleep

  - platform: restart
    name: "Restart Wake Up Light"
    web_server:
      sorting_group_id: group_device
      sorting_weight: 5

###############################################################################
# Networking
#
# Default: permanent standalone AP. Connect to Wake-Up-Light-II and open
# http://192.168.4.1/ . No Internet is required for the local web UI.
#
# To also join a normal 2.4 GHz network (needed for public SNTP), uncomment:
#   ssid: !secret wifi_ssid
#   password: !secret wifi_password
# The AP below then becomes fallback AP.
#
# Do NOT add captive_portal if you want the normal control UI at 192.168.4.1;
# captive_portal presents the Wi-Fi provisioning/OTA page instead.
###############################################################################

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: ${ap_ssid}
    password: !secret ap_password

api:
  encryption:
    key: !secret api_encryption_key

web_server:
  port: 80
  version: 3
  local: true
  sorting_groups:
    - id: group_light
      name: "Light"
      sorting_weight: 10
    - id: group_clock
      name: "Clock and Display"
      sorting_weight: 20
    - id: group_sunset
      name: "Sunset"
      sorting_weight: 25
    - id: group_snooze
      name: "Snooze and Knock"
      sorting_weight: 40
    - id: group_radio
      name: "Radio"
      sorting_weight: 50
    - id: group_device
      name: "Device"
      sorting_weight: 90
  # Recommended on a shared LAN:
  # auth:
  #   username: admin
  #   password: !secret web_password

ota:
  - platform: esphome
  - platform: web_server