# Example ESPHome config for a Samsung 2x20 serial VFD display.
#
# Copy this file into your ESPHome config folder (and add the keys below to
# your secrets.yaml), or use it as a reference for your own device config.
#
# Wiring (display is 5V TTL serial, 9600 8N1):
#   display RX  <-  ESP32 GPIO17 (TX)
#   display GND <-> ESP32 GND
#   display 5V  <-  5V supply (the display needs more current than the ESP32 regulator can give)
#
# To drive the display from GPIO1 (TX0, the USB serial pin) instead, set
# `tx_pin: GPIO1` below and `baud_rate: 0` under `logger:` so log output does
# not end up on the display.

esphome:
  name: samsung-vfd
  friendly_name: Samsung VFD
  on_boot:
    priority: -100
    then:
      - samsung_vfd.clear:
          id: vfd
      - samsung_vfd.print:
          id: vfd
          text: "Hello World!"
          centered: true
      - delay: 3s
      # Bring back the last text Home Assistant set for the top line.
      - samsung_vfd.print:
          id: vfd
          line: 0
          text: !lambda "return id(vfd_line1).state;"

external_components:
  - source: github://REPO_OWNER/REPO_NAME@main
    components: [samsung_vfd]
    refresh: 1d
  # While developing the component, use the checkout instead:
  # - source:
  #     type: local
  #     path: ../components

esp32:
  board: esp32dev
  framework:
    type: arduino

logger:
  level: INFO

api:
  encryption:
    key: !secret api_key

ota:
  - platform: esphome
    password: !secret ota_password

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  # Uncomment to pin a fixed address.
  # manual_ip:
  #   static_ip: 10.1.1.60
  #   gateway: 10.1.1.1
  #   subnet: 255.255.255.0
  ap:
    ssid: "Samsung VFD Fallback"
    password: !secret fallback_password

captive_portal:

# SNTP so samsung_vfd.printf can show the local time.
time:
  - platform: sntp
    id: sntp_time
    timezone: Europe/Amsterdam
    servers:
      - 0.pool.ntp.org
      - 1.pool.ntp.org

uart:
  id: uart_vfd
  tx_pin: GPIO17
  baud_rate: 9600
  # The display is output-only for us; no rx_pin needed.

samsung_vfd:
  id: vfd
  uart_id: uart_vfd
  cols: 20
  rows: 2
  # Lines are padded to 20 chars and the display wraps by itself. Set to true
  # only if line 2 ends up on the wrong row (sends CR LF between the lines).
  send_newlines: false

# Bottom line shows the SNTP clock every second, except while a status banner is up.
interval:
  - interval: 1s
    then:
      - if:
          condition:
            not:
              script.is_running: show_status
          then:
            - samsung_vfd.printf:
                id: vfd
                time_id: sntp_time
                line: 1
                format: "%a %d %b  %H:%M:%S"

# Full-screen centred banner for a while, then back to line 1 + clock.
script:
  - id: show_status
    mode: restart
    parameters:
      msg: string
    then:
      - samsung_vfd.print:
          id: vfd
          text: !lambda "return msg;"
          centered: true
      - delay: 10s
      - samsung_vfd.print:
          id: vfd
          line: 0
          text: !lambda "return id(vfd_line1).state;"
      - samsung_vfd.printf:
          id: vfd
          time_id: sntp_time
          line: 1
          format: "%a %d %b  %H:%M:%S"

# Two Home Assistant text entities you can type into from HA.
text:
  - platform: template
    id: vfd_line1
    name: "VFD line 1"
    icon: mdi:text-box-outline
    mode: text
    max_length: 20
    optimistic: true
    restore_value: true
    initial_value: ""
    on_value:
      then:
        - if:
            condition:
              not:
                script.is_running: show_status
            then:
              - samsung_vfd.print:
                  id: vfd
                  line: 0
                  text: !lambda "return x;"

  - platform: template
    id: vfd_status
    name: "VFD status"
    icon: mdi:information-outline
    mode: text
    max_length: 40
    optimistic: true
    initial_value: ""
    on_value:
      then:
        - if:
            condition:
              lambda: "return !x.empty();"
            then:
              - script.execute:
                  id: show_status
                  msg: !lambda "return x;"