Compare commits
10
Commits
main
..
640ac243be
| Author | SHA1 | Date | |
|---|---|---|---|
|
|
640ac243be | ||
|
|
4aaa1a4610 | ||
|
|
6a52f1af0b | ||
|
|
b8e045d8d6 | ||
|
|
bd773982f8 | ||
|
|
bf17b9c0ba | ||
|
|
02f8289852 | ||
|
|
17d0c1be3b | ||
|
|
49546ce3b3 | ||
|
|
a4e5694a1d |
No files matched your search
@@ -82,26 +82,10 @@ through a MAX3232. The [desk case](case/README.md) is made for that board.
|
||||
|
||||
### Power
|
||||
|
||||
The display takes 4.5–26 V. Its supply current with all dots lit (datasheet
|
||||
section 4.6):
|
||||
|
||||
| Supply | Typical | Maximum | Inrush at power-on (5 × max) |
|
||||
|--------|---------|---------|------------------------------|
|
||||
| 5 V | 0.8 A | 1.2 A | up to 6 A |
|
||||
| 12 V | 0.35 A | 0.55 A | up to 2.75 A |
|
||||
| 24 V | 0.2 A | 0.3 A | up to 1.5 A |
|
||||
|
||||
The inrush current sets the size of the supply, not the running current. A
|
||||
12 V 1 A adapter is **not enough**: it current-limits at power-on and the
|
||||
display browns out during start-up. A dev-board regulator can't supply this
|
||||
either, so give the display its own supply and connect the grounds together:
|
||||
|
||||
- **12 V, 3 A or more** (recommended). The D1 R1 can share it through its
|
||||
barrel jack, which accepts up to 12 V.
|
||||
- **12 V, 2 A plus a bulk capacitor** of 2200 µF / 25 V or more across VCC and
|
||||
GND at the display connector, so the capacitor supplies the inrush peak.
|
||||
- **24 V, 2 A.** This has the lowest current, but don't feed it to the D1 R1's
|
||||
barrel jack: power the board separately, e.g. over USB.
|
||||
The display takes 5–24 V. At 5 V it draws about 0.8 A typical and 1.2 A
|
||||
maximum, and the inrush current at power-on can be up to five times that. A
|
||||
dev-board regulator can't supply this, so give the display its own supply,
|
||||
for example 12 V at 1 A, and connect the grounds together.
|
||||
|
||||
### Signal levels
|
||||
|
||||
|
||||
@@ -10,14 +10,6 @@ back wall.
|
||||
<img src="section.png" alt="Cross-section: display on the bezel, board on the base" width="49%">
|
||||
</p>
|
||||
|
||||
The printed build, assembled and with the body removed (D1 R1 with a
|
||||
proto shield carrying the MAX3232):
|
||||
|
||||
<p>
|
||||
<img src="build-front.jpg" alt="Printed case, assembled" width="49%">
|
||||
<img src="build-inside.jpg" alt="Inside the case: display on the bezel, D1 R1 on the base" width="49%">
|
||||
</p>
|
||||
|
||||
Outer size: about 208 × 112 × 86 mm (W × D × H). The parts need a print bed of
|
||||
at least 210 × 115 mm.
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 3.3 MiB |
Binary file not shown.
|
Before Width: | Height: | Size: 2.5 MiB |
Binary file not shown.
|
Before Width: | Height: | Size: 1.4 MiB After Width: | Height: | Size: 1.4 MiB |
Binary file not shown.
|
Before Width: | Height: | Size: 3.1 MiB After Width: | Height: | Size: 3.1 MiB |
Reference in new issue
Block a user