The reference build now uses a D1 R1. The example config targets
esp8266/d1 and sends on GPIO2 (header pin D9, UART1 TX), which leaves
UART0 free for the USB logger. The README wiring and signal-level notes
are updated to match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Brightness, blink, screen on/off, annunciators, cursor control, display
modes, user-defined characters, code table, international charset,
peripheral select, self-test, raw writes and reinit
- UTF-8 text is encoded with the selected code table (tables generated
from Python codecs by tools/gen_charmaps.py), falling back to
accent-stripping
- Settings survive reinit and the self-test
- Example gains brightness select and display switch, and uses the git
source on mangavalk.com
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 20L203 input is RS-232 (reference build uses a MAX3232), it runs on
5-24 V, and it boots in non-scrolling overwrite mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mangavalkandClaude Opus 5.5