Each foot has a spigot that locates in the base's screw counterbore and a
pocket for the screw head; base screws become M3x10. Base unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The glass is 4.4 mm off-centre on the display PCB. Turning the display
180 degrees so the text reads correctly moved the glass partly behind the
window edge. New disp_rotated option (default on) moves the bezel bosses
to match. Only the bezel changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Parametric OpenSCAD design: 15 degree bezel holding the display on M3
heat-set inserts, slides into the body; base carries the board with the
DC jack and USB reachable through the back. Includes STLs, previews and
collision checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mangavalkandClaude Opus 5.5