mangavalkandClaude Opus 5.5
a18f081e0a
- ColorduinoPlasma sketch and Colorduino library v1.2.6 (lincomatic @ fff7bd3) - ColorduinoMatrixTest hardware test sketch - web/index.html: bit-accurate port of the plasma with large resolutions - prebuilt 16 MHz firmware (with and without Optiboot) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
10 lines
812 B
Plaintext
10 lines
812 B
Plaintext
Arduino Interface Library for ITeadStudio Colorduino and Colors Shield
|
|
Copyright (c) 2011-2016 Sam C. Lin <lincomatic@hotmail.com>
|
|
|
|
To install, copy libraries/Colorduino to your <arduino sketchbook folder>/libraries/Colorduino folder.
|
|
ColorduinoPlasma.pde is a sample program which uses the library. It displays an animated plasma on an 8x8 LED matrix
|
|
|
|
NOTE: Later versions of Arduino make the library run slowly. It's easy to see because ColorduinoPlasma runs slowly in a step-like version. I'm not sure which version triggers the slowdown, but my testing with Arduino 1.6.3 -> 1.8.1 all exhibit the slowdown. Arduino 1.0.2 runs full speed
|
|
|
|
Modified: Removed the inefficient digitalPinToBitMask() and digitalPinToPort(), which was causing the sketch to run very slow if compiled by later versions of Arduino.
|