13-Dash-Mount: dashboard holder (OpenSCAD + STLs), base printed

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-10-24 17:27:42 +02:00
1 parent c22b98de76
commit 15b4ef5cef
7 files changed
+64018 -1

No files matched your search

+1 -1
View File
@@ -81,7 +81,7 @@ Display color format is `RGB565_SWAPPED` (ST77916 byte order, set in `lv_conf.h`
| `tools` | `gif_to_360.py` — converts GIFs to 360×360 for the device (Pillow; scale to cover + center crop, keeps frame timing) |
| `shared` | **Shared code for all JC3636W518 projects:** `jc3636w518.ini` (PlatformIO base config), `include/lv_conf.h` (LVGL 9.6), `lib/JC3636W518` (board library). See its `README.md` |
| `12-OBD-Speed` | **The new program — working in the car (2026-10-23):** speed from the ELM327 over BLE as big number + arc gauge on a GIF background, battery-voltage arc in the bottom gap, idle/screen-off mode (both **verified by the user**); swipe left for the adapter menu (scan, select → remembered in NVS, auto-reconnect every 3 s), again for settings (rotation, idle/screen-off timeout), again for the background (GIF from SD `/gifs` copied into an 11.9 MB raw flash partition, own `partitions.csv`). See its `README.md` |
| `13-Dash-Mount` | **3D-printed dashboard holder** (OpenSCAD, 2026-10-23, not yet printed): snap-in cup with lip over the bezel + USB-C opening on the side, detent tilt hinge (36 face teeth = 10° steps, M3×20 bolt + captive nut + printed knob), flat foot for VHB tape. ASA. User's choices: adhesive base, detent hinge, M3, cable exits sideways, only a USB-C opening needed. OpenSCAD is installed (`C:\Program Files\OpenSCAD\openscad.exe`, use from bash for `-D part="..."` quoting). See its `README.md` |
| `13-Dash-Mount` | **3D-printed dashboard holder** (OpenSCAD, 2026-10-23; **base printed 2026-10-24, user: "perfect"**): snap-in cup with lip over the bezel + USB-C opening on the side, detent tilt hinge (36 face teeth = 10° steps, M3×20 bolt + captive nut + printed knob), flat foot for VHB tape. ASA. User's choices: adhesive base, detent hinge, M3, cable exits sideways, only a USB-C opening needed. OpenSCAD is installed (`C:\Program Files\OpenSCAD\openscad.exe`, use from bash for `-D part="..."` quoting). See its `README.md` |
| `10-GIF-Tests` | **GIF playback experiments** (was `10-OBD-Display-2024`): `display_gif_embedded`, `display_gif_sd`, `assets/gifs`. The 2024 bridge/ELMulator/WiFi speed sketch, the broken LVGL 9 archive and the BLE scanner tool (`11-BLE-Scanner`: on-screen scan, GATT listing, ELM test, LittleFS log) were removed 2026-10-23 — all in git history |
| `3-Specification` | Spec sheet (factory firmware features, interface photo) |
| `4-Chip manual` | ESP32-S3R8 datasheet, PCM5100A datasheet |