Public Access
mangavalkandClaude Opus 5.5
090c2bf8ae
The Nano's periodic full redraw blocked for ~0.8 s. A frame that arrived meanwhile overflowed its 64-byte serial buffer; lost bytes in a bitmap shift the rest of the image (picture moved up), and diff frames never repaired it. - Nano: all drawing (frames, effects, the dot refresh) runs from update() in ~1 ms slices; the refresh pauses while a frame is received or shown - New commands: C (reply with the image checksum) and I (refresh minutes, EEPROM) - ESP32: NanoMonitor asks for the checksum after frames and sends the whole image again on a mismatch, missing answer or Nano restart; counts ERR replies. Periodic whole-image resync. - Settings: "Dot refresh" and "Image resync" intervals (settings v5, v4 records are migrated) - System tab: loop timing, free memory, frame check counts - test_driver: the real driver against a simulated panel Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
26 lines
958 B
C
26 lines
958 B
C
#pragma once
|
|
|
|
#include <stdint.h>
|
|
|
|
// CRC-16/CCITT-FALSE of a display buffer as BROSE9323 keeps it: rows of (width + 7) / 8
|
|
// bytes, bit (x & 7) is dot x. The unused bits at the end of each row are left out, so
|
|
// only the dots count (fillScreen sets them, drawPixel never does). The Nano answers the
|
|
// C command with it; the ESP32 compares it with its own copy (src/esp32/nano_link).
|
|
inline uint16_t bufferCrc(const uint8_t *buffer, uint8_t width, uint8_t height)
|
|
{
|
|
const uint8_t row_bytes = (width + 7) / 8;
|
|
const uint8_t last_mask = (width & 7) ? (uint8_t)((1 << (width & 7)) - 1) : 0xFF;
|
|
uint16_t crc = 0xFFFF;
|
|
for (uint8_t y = 0; y < height; y++)
|
|
for (uint8_t i = 0; i < row_bytes; i++)
|
|
{
|
|
uint8_t b = buffer[y * row_bytes + i];
|
|
if (i == row_bytes - 1)
|
|
b &= last_mask;
|
|
crc ^= (uint16_t)b << 8;
|
|
for (uint8_t k = 0; k < 8; k++)
|
|
crc = (crc & 0x8000) ? (uint16_t)((crc << 1) ^ 0x1021) : (uint16_t)(crc << 1);
|
|
}
|
|
return crc;
|
|
}
|