mangavalkandClaude Opus 5.5 7a28e34380 Fix dense images on the Nano and the off image in slow mode ...

- Nano: B data is drawn fast enough for the serial line. A hex digit arrives
  every 87 us; with a division and four drawPixel() calls per digit a lit
  digit took about 105 us, so dense frames (all yellow, the panda bitmap)
  overflowed the 64 byte receive buffer: frames not shown or wrong, "Line
  too long", frame check repairs that failed the same way. Now the parser
  counts columns and rows and BROSE9323::drawDots() sets the 4 dots
  (about 20 us).
- ESP32: Power off and the start of the night draw the off image also when
  slow mode had the power off already (it powers on for it, once)
- Tests: drawDots() against drawPixel(), off image in slow mode
- Version 2.19.3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-22 00:24:14 +02:00

..

Arduino.h

Add native unit tests for the Nano firmware

2026-10-13 00:24:13 +02:00

BROSE9323.h

Fix dense images on the Nano and the off image in slow mode

2026-10-22 00:24:14 +02:00

EEPROM.h

Add native unit tests for the Nano firmware

2026-10-13 00:24:13 +02:00