Flipdot-display/src/esp32

ESP32: controller

PlatformIO environments: esp32 (OTA) and esp32_usb (USB). Tests: test_esp32.

The ESP32 decides what is shown on the display. It never touches the panel itself. The BROSE9323 driver is built with -D ESPSERIAL, so every GFX call is sent to the Nano over Serial2 (UART2, GPIO 17 TX / GPIO 16 RX, 115200 baud). Serial (USB) is only used for debug output. Wiring is described in the documentation.

Files

File	Contents
main.cpp	setup() and loop(): the order of things at boot and in the loop
app.*	The objects (display, Nano link, controller, ...) and the actions the web UI uses: settings, page, live mode
config.h	Fixed settings: pins, timings, timezone, Home Assistant device id
credentials.h	Includes secrets.h (WiFi and MQTT credentials, gitignored); template: secrets.example.h
logic/	Pure logic without Arduino code, tested on the PC
logic/display_controller.*	Decides what is shown and when the display is powered: page, live mode, schedule, Home Assistant switches (DisplayController)
logic/settings.*	The settings of the web UI with their defaults and checks
logic/schedule.*	When the display is on (night, clock, standby), from the settings
logic/bitmap_format.*	84 x 19 bitmap format, hex encoding, names of bitmaps, pages and fonts
logic/page.*	Dynamic pages: the struct, checks, time slots, texts of the elements (clock, date, Home Assistant value, text)
logic/page_render.*	Draws a dynamic page into a bitmap (display and web previews)
logic/font.*	Dot font format (built-in and uploaded fonts), text width, drawing
logic/builtin_fonts.*	Small, Normal, Large, Full height; the .cpp is generated by tools/make_builtin_fonts.py
logic/builtin_pages.*	The built-in Clock page (the clock of the old firmware)
logic/page_schedule.*	Schedule blocks and trigger rules: the structs, checks, rule conditions
logic/page_selector.*	Which page is shown now: rules, a manual pick, the rotating schedule (PageSelector)
logic/stopwatch.h	The stopwatch of the dynamic pages
logic/power_timer.*	Countdown to switching the display off
logic/status_led.h	Blink pattern of the built-in LED
logic/boot_policy.*	How to start after a reset: normal, OTA-only window, safe mode
system/	Keeping OTA alive (system_store and boot_target are shared with the recovery app)
system/firmware_guard.*	Rollback of bad OTA firmware, watchdog, crash counter, power-cycle trigger, status for Home Assistant
system/boot_target.*	Switching between the clock firmware and the recovery app
system/system_store.*	Settings in NVS: WiFi, recovery reason, firmware slot and version, power-on count
system/settings_store.*	The web UI settings in NVS
system/schedule_store.*	The page schedule and rules in NVS
display/	What is drawn
display/frames.*	The screens: dynamic page, "No WiFi", page bitmap, live image, off image (FlipdotFrames)
display/bitmap_store.*	Built-in bitmaps and the uploaded ones on LittleFS
display/page_store.*	Built-in and stored dynamic pages (/pages/<name>.pg)
display/font_store.*	Built-in and uploaded fonts (/fonts/<name>.fnt)
display/page_resources.*	Gives the page renderer its bitmaps, fonts and Home Assistant values
display/status_screen.*	Two-line status messages at boot, after a crash and in the recovery app (StatusScreen)
display/text.*	Centered text lines on the 84 x 19 display
display/bitmaps.h	1-bit bitmaps (Nintendo logo, Pikachu with the thought bubble, ...)
nano_link/	Connection to the Nano
nano_link/nano_link.*	Relay and serial link: power on (waits for READY), power off, bootloader start (NanoLink)
nano_link/nano_flash_bridge.*	WiFi to serial bridge for flashing the Nano over WiFi (TCP port 2323)
net/	Network
net/wifi_ota.*	WiFi (with a restart when it stays down), ESP32 OTA updates, OTA-only mode
net/home_assistant.*	MQTT and the Home Assistant entities (power switch, mode and off image dropdowns, IP and firmware sensors, recovery button)
net/ha_api.*	Reads Home Assistant entity values over the REST API for the dynamic pages
web/	Web UI (see the documentation)
web/web_ui.*	Web server and JSON API (the endpoints are listed in web_ui.h)
web/page_json.*	Dynamic pages as JSON
web/schedule_json.*	The page schedule and rules as JSON
web/web_page.h	The page: HTML and JavaScript; the browser converts images and draws the previews

DisplayController only talks to two small interfaces, DisplayPower (implemented by NanoLink) and Frames (implemented by FlipdotFrames). The tests replace both with fakes.

Keeping OTA alive

The ESP32 must stay reachable over OTA whatever the firmware does, so it never needs USB again. Several layers take care of that:

Problem	What happens
A new OTA firmware crashes, hangs or can't connect to WiFi	Rollback. A new firmware is only marked as good after it has run for 60 s with WiFi. If it restarts before that, the bootloader starts the previous firmware again.
The firmware hangs in loop()	Watchdog. If loop() doesn't run for 30 s, the ESP32 restarts. That counts as a crash.
The firmware crashes once or twice	OTA window. After a crash the ESP32 runs only WiFi and OTA for 15 s (LED blinks fast), then starts the main code again.
The firmware keeps crashing (3 times in a row)	Recovery app for 10 minutes (see the documentation). Then the main code gets one more try; one more crash brings the recovery app back. Running 5 minutes without a crash clears the counter. Without the recovery app installed: only WiFi and OTA run, for 10 minutes.
WiFi doesn't connect at boot (30 s), or stays down for 10 minutes	Recovery app, which keeps trying and opens the FlipDot-Setup WiFi with a setup page to choose another WiFi. Without the recovery app: restart.
The firmware runs, but its OTA is broken	Recovery app through the Home Assistant button, or by switching the power on and off 3 times quickly.

So in every case you can flash a fix with pio run -e esp32 -t upload, at the latest after waiting for a safe-mode cycle.

The FlipDot Display Firmware sensor in Home Assistant shows the state, e.g. 2.1.0, ok, 0 crashes:

State	Meaning
testing	New OTA firmware, not yet marked as good (first 60 s)
ok	Firmware marked as good
ok, no rollback in bootloader	The bootloader on the ESP32 can't roll back. The other layers still work. The one-time USB install of the recovery app also installs a bootloader that can.
usb	Flashed over USB, so there is no previous firmware to roll back to

Rules for changing the code:

• Keep otaLoop() and firmwareGuardLoop() at the top of loop().
• Never block loop() for 30 s or longer.
• Change FIRMWARE_VERSION in config.h with each release, so the sensor shows which version is running.

Features

• Status on the display: Connecting to WiFi... and Getting the time... at boot, Crashed! messages in the OTA-only modes, and No WiFi with the time when WiFi is down for more than a minute. See the table in the documentation.

• Frames only when something changes: a new frame is sent when the minute changes, the screen changes (clock, page, off image) or the Nano was just powered on. The serial line is quiet in between, which also gives the Nano time for its periodic full redraw.

• OTA updates through ArduinoOTA. Hostname: FlipDotDisplay.

• Robust OTA: rollback, watchdog, OTA window after a crash and safe mode, see Keeping OTA alive.

• NTP time with timezone CET-1CEST,M3.5.0,M10.5.0/3 (Europe/Amsterdam). Until the time is synced, the display shows "Connecting...".

• Home Assistant through MQTT (home-assistant-integration library). The switch and the dropdown report their new state back, so Home Assistant always shows the real state.

  • FlipDot Display Power switch: off = clear the display and power it off after 1 s
  • FlipDot Display Mode dropdown: the page shown during the day, Clock or a bitmap. The options follow the bitmaps saved in the web UI (net/ha_page_select.*, because ArduinoHA's HASelect can't change its options).
  • FlipDot Display Off image dropdown: Blank or a bitmap, drawn instead of a blank screen at night and when the Power switch turns the display off
  • FlipDot Display IP sensor: the IP address

  The old FlipDot Display Clock switch is removed from Home Assistant on connect (empty retained discovery config). Plus the FlipDot Display Firmware sensor (see Keeping OTA alive) and the FlipDot Display Recovery button, which restarts into the recovery app for 10 minutes.

• Relay on GPIO 13 switches the power for both the panels and the Nano. LOW turns it on.

  • On: the ESP waits for the Nano's READY message, at most 3 s (NANO_BOOT_TIMEOUT), before it sends frames.
  • Off: the ESP releases its TX pin (Serial2.end() and the pin set to input). An idle UART line is high and would otherwise power the Nano through its RX pin.

• Nano flash bridge: pio run -e nano_ota -t upload flashes the Nano through the ESP32. While a flash session runs, the clock is paused. See the documentation.

• Status LED (built-in): off while the display is off, slow blink with WiFi, fast blink without WiFi.

Schedule

Time	Display
08:00 – 22:00	The page; the built-in Clock page shows Pikachu and the clock (yawning from 17:00), updated every minute
22:00 – 23:30	Clock shown only during the minutes :00, :15, :30 and :45. In between the power is off, and the last time stays visible (flipdots keep their image without power).
23:31 – 08:00	Screen cleared, power off after 30 s

The times are in logic/schedule.cpp.

Tests

pio test -e test_esp32 runs test/test_esp32 on the PC: the schedule boundaries, the power timer (including millis() overflow), the LED pattern, the boot policy (crash counting, safe mode, rollback timing) and the display controller (power on/off, redraws, both Home Assistant switches).

Adding bitmaps

The easy way is the web UI (Draw / Live tab): load an image, adjust it, save it.

To build a bitmap into the firmware instead: convert it with image2cpp to "Arduino code", horizontal, 1 bit per pixel, 84 x 19. Paste the array into display/bitmaps.h and add it to BUILTIN in display/bitmap_store.cpp.

Live view of the display

The BROSE9323 driver keeps a shadow copy of what was sent to the Nano (shownPixel()), updated on every display(). GET /api/screen returns it, and the web UI polls it. It also keeps the last image while the display is switched off, like the dots do.