Public Access
Random refresh effect: choose which effects it picks from
The list is a new setting (hardware settings, also used by pages set to Random); an empty list is refused. The ESP32 picks an effect per frame and sends that, so the Nano needs no change. The power-on time after a frame now follows the slowest effect on the list. The settings record goes to version 8. Version 7 is a prefix of it, so it is still read, and becomes version 8 with the next save. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
8fcb17c395
commit
48e29096c0
12 files changed
+140
-21
No files matched your search
+2
-1
@@ -141,7 +141,8 @@ The display schedule (on/off, when the display is on, when it switches off); slo
|
||||
and is switched off in between, for less noise); the "No WiFi" screen; the flip time, the pause after each pulse,
|
||||
pulses per dot and the refresh effect (instant, sparkle, wipe, rain, from the middle out,
|
||||
diagonal, spiral, flip all then reveal, push, Matrix (yellow streaks fall down the columns
|
||||
that change and leave the new image behind them), random; optionally only for small changes
|
||||
that change and leave the new image behind them), random (with a list of the effects it can
|
||||
pick from, also for pages set to random); optionally only for small changes
|
||||
like the clock's minutes; pages can choose their own effect); how often every dot is flipped again ("Dot refresh", default
|
||||
2 min) and how often the whole image is sent again ("Image resync", default 10 min; 0
|
||||
switches either off); test patterns; the status LED.
|
||||
|
||||
Reference in new issue
Block a user