Random refresh effect: choose which effects it picks from

The list is a new setting (hardware settings, also used by pages set to
Random); an empty list is refused. The ESP32 picks an effect per frame and
sends that, so the Nano needs no change. The power-on time after a frame now
follows the slowest effect on the list.

The settings record goes to version 8. Version 7 is a prefix of it, so it is
still read, and becomes version 8 with the next save.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-04 02:41:41 +01:00
1 parent 8fcb17c395
commit 48e29096c0
12 files changed
+140 -21

No files matched your search

+2 -1
View File
@@ -141,7 +141,8 @@ The display schedule (on/off, when the display is on, when it switches off); slo
and is switched off in between, for less noise); the "No WiFi" screen; the flip time, the pause after each pulse,
pulses per dot and the refresh effect (instant, sparkle, wipe, rain, from the middle out,
diagonal, spiral, flip all then reveal, push, Matrix (yellow streaks fall down the columns
that change and leave the new image behind them), random; optionally only for small changes
that change and leave the new image behind them), random (with a list of the effects it can
pick from, also for pages set to random); optionally only for small changes
like the clock's minutes; pages can choose their own effect); how often every dot is flipped again ("Dot refresh", default
2 min) and how often the whole image is sent again ("Image resync", default 10 min; 0
switches either off); test patterns; the status LED.