Add HA dropdowns, off image, flip fixes and refresh effects

Home Assistant: remove the Clock switch (its entity is deleted on connect),
add an IP sensor and Mode / Off image dropdowns whose options follow the
saved bitmaps. Remove the built-in "Nintendo border" bitmap.

Off image: a bitmap (or blank) left on the dots when the display switches off.

Nano: pause after each flip pulse and repeat pulses for changed dots, both
stored in EEPROM (G/N commands). Refresh effects (E command): instant,
sparkle, wipe, rain, from the middle out, diagonal, spiral, flip all then
reveal, push and random, optionally only for small changes. Effects run in
steps from loop() so serial input keeps flowing.

Web UI: flip settings, refresh effect and test patterns under Settings; the
System tab shows why the ESP32 last restarted. Settings records from
versions 1 and 2 are migrated. Firmware 2.3.0.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

src/esp32/system/firmware_guard.cpp

@@ -168,6 +168,35 @@ void firmwareGuardLoop(bool wifi_connected)
 	}
 }
 
+const char *firmwareGuardResetReason()
+{
+	switch (esp_reset_reason())
+	{
+	case ESP_RST_POWERON:
+		return "power on";
+	case ESP_RST_EXT:
+		return "reset pin";
+	case ESP_RST_SW:
+		return "restart";
+	case ESP_RST_PANIC:
+		return "crash";
+	case ESP_RST_INT_WDT:
+		return "watchdog (interrupt)";
+	case ESP_RST_TASK_WDT:
+		return "watchdog (task)";
+	case ESP_RST_WDT:
+		return "watchdog";
+	case ESP_RST_DEEPSLEEP:
+		return "deep sleep";
+	case ESP_RST_BROWNOUT:
+		return "brownout (supply voltage dropped)";
+	case ESP_RST_SDIO:
+		return "SDIO";
+	default:
+		return "unknown";
+	}
+}
+
 const char *firmwareGuardStatus()
 {
 	return status;