Stopwatch counts in real time from a start date, kept over a restart

The stopwatch counted with millis(), so it started at 0 after every
restart and would overflow after 49 days. It now keeps the real start
time (UTC ms) and the time counted before a pause, stored in NVS
(system/stopwatch_store) on every change, so it keeps counting while
the display is off or restarting. Stop pauses, Start continues, and the
Stopwatch tab can set the start to a date and time (local, summer time
by mktime) to count from, e.g. days since an event. Start, stop and set
need the synced time.

New page formats: 12d 4:05:09 and 3w 2d.

Version 2.19.0, tested on the display over OTA (set start, future and
invalid dates refused, pause, restart).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

src/esp32/config.h

@@ -118,7 +118,7 @@ const uint32_t SETUP_AP_DELAY = 20000;        // open the AP when WiFi fails thi
 const uint32_t WIFI_CONNECT_TIMEOUT = 30000;
 const uint32_t WIFI_RESTART_TIME = 10UL * 60 * 1000;
 
-#define FIRMWARE_VERSION "2.18.2"
+#define FIRMWARE_VERSION "2.19.0"
 
 // Home Assistant device id (do not change: Home Assistant's entities are linked to it)
 const uint8_t HA_DEVICE_ID[] = {0x34, 0x86, 0x5d, 0x3a, 0x08, 0x28};