Public Access
59 lines
1.9 KiB
INI
59 lines
1.9 KiB
INI
 
|
; Flipdot display - one PlatformIO project, two firmware targets.
|
||
|
|
;
|
||
|
|
; nano Arduino Nano that drives the Brose flipdot panels directly
|
||
|
|
; esp32 ESP32 "brain" (WiFi, NTP clock, Home Assistant) - OTA upload
|
||
|
|
; esp32_usb Same ESP32 firmware, flashed over USB (first flash / recovery)
|
||
|
|
;
|
||
|
|
; Build all: pio run
|
||
|
|
; Build one: pio run -e nano
|
||
|
|
; Upload one: pio run -e nano -t upload
|
||
|
|
; Serial monitor: pio device monitor -e nano
|
||
|
|
;
|
||
|
|
; https://docs.platformio.org/page/projectconf.html
|
||
|
|
|
||
|
|
[platformio]
|
||
|
|
default_envs = nano, esp32
|
||
|
|
|
||
|
|
[env]
|
||
|
|
framework = arduino
|
||
|
|
monitor_speed = 115200
|
||
|
|
lib_deps =
|
||
|
|
adafruit/Adafruit GFX Library@^1.10.12
|
||
|
|
|
||
|
|
; ---------------------------------------------------------------------------
|
||
|
|
; Arduino Nano - display driver
|
||
|
|
; ---------------------------------------------------------------------------
|
||
|
|
[env:nano]
|
||
|
|
platform = atmelavr
|
||
|
|
board = nanoatmega328
|
||
|
|
board_build.mcu = atmega328p
|
||
|
|
board_build.f_cpu = 16000000L
|
||
|
|
build_src_filter = +<nano/>
|
||
|
|
; Uncomment when using the PLCC adapter board (different pinout, see lib/BROSE9323/BROSE9323.h)
|
||
|
|
; build_flags = -D FLIPDOT_PLCC_ADAPTER
|
||
|
|
upload_port = COM10
|
||
|
|
monitor_port = COM10
|
||
|
|
|
||
|
|
; ---------------------------------------------------------------------------
|
||
|
|
; ESP32 - controller, talks to the Nano over serial
|
||
|
|
; ---------------------------------------------------------------------------
|
||
|
|
[env:esp32]
|
||
|
|
platform = espressif32
|
||
|
|
board = esp32doit-devkit-v1
|
||
|
|
build_src_filter = +<esp32/>
|
||
|
|
; ESPSERIAL turns the BROSE9323 driver into a serial client: every draw call is
|
||
|
|
; sent to the Nano as a text command instead of toggling GPIO pins.
|
||
|
|
build_flags = -D ESPSERIAL
|
||
|
|
lib_deps =
|
||
|
|
${env.lib_deps}
|
||
|
|
https://github.com/robjen/GFX_fonts.git
|
||
|
|
dawidchyrzynski/home-assistant-integration@^2.1.0
|
||
|
|
knolleary/PubSubClient@^2.8.0
|
||
|
|
upload_protocol = espota
|
||
|
|
upload_port = 10.1.1.198
|
||
|
|
monitor_port = COM11
|
||
|
|
|
||
|
|
[env:esp32_usb]
|
||
|
|
extends = env:esp32
|
||
|
|
upload_protocol = esptool
|
||
|
|
upload_port = COM11
|