Public Access
26 lines
1.5 KiB
Markdown
26 lines
1.5 KiB
Markdown
 
|
# How it works
|
|||
|
|
|
|||
|
|
[← Back to the README](../README.md)
|
|||
|
|
|
|||
|
|
1. **ESP32 boot.** The ESP32 connects to WiFi and starts ArduinoOTA. After a crash it
|
|||
|
|
runs only OTA for 15 seconds, and after repeated crashes it goes to safe mode. Bad OTA
|
|||
|
|
firmware is rolled back automatically, see
|
|||
|
|
[Keeping OTA alive](../src/esp32/README.md#keeping-ota-alive). It then switches the display relay on, waits for
|
|||
|
|
the Nano's `READY` message (at most 3 s), shows "Connecting...", starts NTP and
|
|||
|
|
connects to MQTT.
|
|||
|
|
2. **Clock.** Once the time is synced, the ESP32 sends a new frame whenever the screen
|
|||
|
|
changes, mostly once a minute:
|
|||
|
|
- **08:00–22:00:** the page: the chosen page (by default the built-in Clock page,
|
|||
|
|
Pikachu with a thought bubble showing `HH:MM`, yawning from 17:00), or what the
|
|||
|
|
[schedule and rules](web-ui.md#schedule) pick.
|
|||
|
|
- **22:00–23:30:** the clock is only shown during the minutes :00, :15, :30 and :45.
|
|||
|
|
30 seconds after each of those minutes, the relay turns the display off.
|
|||
|
|
- **23:31–08:00:** the screen is cleared (or shows the off image chosen in the web UI)
|
|||
|
|
and power is cut after 30 seconds.
|
|||
|
|
3. **Home Assistant**: switches, dropdowns and sensors over MQTT, see
|
|||
|
|
[Home Assistant](home-assistant.md).
|
|||
|
|
4. **Nano.** The Nano reads commands from the serial line and updates its frame buffer.
|
|||
|
|
On `D` it flips only the dots that changed. Every 2 minutes it redraws the whole screen
|
|||
|
|
to fix dots that did not flip.
|
|||
|
|
|
|||
|
|
The serial protocol is described in [src/nano/README.md](../src/nano/README.md).
|