Flipdot-display/src/esp32/app.cpp

#include "app.h"

#include <string.h>
#include <sys/time.h>
#include <time.h>

#include "config.h"
#include "display/bitmap_store.h"
#include "display/font_store.h"
#include "display/page_resources.h"
#include "display/page_store.h"
#include "logic/page_selector.h"
#include "net/ha_api.h"
#include "system/schedule_store.h"
#include "system/settings_store.h"

static void copyName(char *out, const char *name)
{
	strncpy(out, name, PAGE_NAME_SIZE - 1);
	out[PAGE_NAME_SIZE - 1] = '\0';
}

NanoLink nano(Serial2, NANO_RX_PIN, NANO_TX_PIN, RELAY_PIN, NANO_RESET_PIN);
BROSE9323 display(DISPLAY_WIDTH, DISPLAY_HEIGHT, PANEL_WIDTH);
FlipdotFrames frames(display, pageResources);
StatusScreen status(display, nano);
DisplayController controller(nano, frames);
LoopStats loopStats;
NanoMonitor nanoMonitor(nano, display);

static Settings settings;
static bool restart_pending = false;
static uint32_t restart_at = 0;
// Not on the stack: about 1.7 KB
static DynamicPage loaded_page;
// What is shown when (about 2.7 KB), and which page that is now
static PageSchedule page_schedule;
static PageSelector selector;
static char shown[PAGE_NAME_SIZE] = DEFAULT_PAGE;
static PageChoice shown_choice;
static bool time_known = false;

static void showDynamicPage()
{
	frames.setDynamicPage(loaded_page);
	haApiWatch(&loaded_page);
	controller.setPage(Page::Dynamic);
}

// Load the shown page into the frames: a dynamic page or a bitmap; the Clock page when it is
// gone. instant: the next frame without the refresh effect.
static void applyPage(bool instant = false)
{
	if (instant)
		frames.showNextInstant();
	if (loadPage(shown, loaded_page))
	{
		showDynamicPage();
		return;
	}
	uint8_t bitmap[BITMAP_BYTES];
	if (loadBitmap(shown, bitmap))
	{
		frames.setPageBitmap(bitmap);
		haApiWatch(nullptr);
		controller.setPage(Page::Bitmap);
		return;
	}
	Serial.printf("Page \"%s\" not found, showing the clock\n", shown);
	builtinPage(DEFAULT_PAGE, loaded_page);
	showDynamicPage();
}

// Load the off bitmap into the frames; blank when it is gone
static void applyOffPage()
{
	uint8_t bitmap[BITMAP_BYTES];
	if (settings.off_page[0] && loadBitmap(settings.off_page, bitmap))
		frames.setOffBitmap(bitmap);
	else
	{
		if (settings.off_page[0])
			Serial.printf("Off bitmap \"%s\" not found, the display is cleared instead\n", settings.off_page);
		frames.setOffBitmap(nullptr);
	}
}

static void apply()
{
	controller.setSettings(settings.schedule, settings.clock);
	controller.setEffectTime(effectTime(settings.drive));
	status.setDrive(settings.flip_time, settings.drive, settings.refresh.dots);
	frames.setDrive(settings.flip_time, settings.drive);
	haApiSetSettings(settings.home_assistant);
	applyOffPage();
	applyPage();
}

// Something the current page may use changed: load it again and redraw
static void reloadPage()
{
	applyPage();
	controller.pageChanged();
}

const Settings &appSettings()
{
	return settings;
}

void appLoadSettings()
{
	loadSettings(settings);
	loadSchedule(page_schedule);
	selector.setSchedule(&page_schedule);
	selector.setChosen(settings.page);
	haApiWatchRules(&page_schedule);
	copyName(shown, settings.page); // until the time is known
	apply();
}

static bool sameMqtt(const HomeAssistantSettings &a, const HomeAssistantSettings &b)
{
	return a.enabled == b.enabled && a.port == b.port && strcmp(a.host, b.host) == 0 &&
		   strcmp(a.user, b.user) == 0 && strcmp(a.password, b.password) == 0;
}

const char *appSaveSettings(const Settings &new_settings, bool &restart_needed)
{
	const char *error = validateSettings(new_settings);
	if (error)
		return error;
	if (!pageExists(new_settings.page) && !bitmapExists(new_settings.page))
		return "Page not found";
	if (new_settings.off_page[0] && !bitmapExists(new_settings.off_page))
		return "Off bitmap not found";

	restart_needed = !sameMqtt(settings.home_assistant, new_settings.home_assistant);
	const DriveSettings &a = settings.drive, &b = new_settings.drive;
	bool drive_changed = settings.flip_time != new_settings.flip_time || a.flip_gap != b.flip_gap ||
						 a.pulses != b.pulses || a.effect != b.effect || a.effect_time != b.effect_time ||
						 a.effect_small_only != b.effect_small_only ||
						 settings.refresh.dots != new_settings.refresh.dots;
	settings = new_settings;
	saveSettings(settings);
	selector.setChosen(settings.page);
	apply();
	if (drive_changed)
		status.sendDrive();
	return nullptr;
}


// The chosen page, without overriding the schedule
static void setChosen(const char *name)
{
	copyName(settings.page, name);
	saveSettings(settings);
	selector.setChosen(name);
}

const char *appSelectPage(const char *name)
{
	if (!pageExists(name) && !bitmapExists(name))
		return "Page not found";
	setChosen(name);
	selector.pick(name);
	if (!time_known)
	{
		copyName(shown, name);
		applyPage();
	}
	return nullptr;
}

const char *appSaveSchedule(const PageSchedule &schedule)
{
	const char *error = validateSchedule(schedule);
	if (error)
		return error;
	for (int i = 0; i < schedule.block_count; i++)
		for (int j = 0; j < schedule.blocks[i].item_count; j++)
		{
			const char *page = schedule.blocks[i].items[j].page;
			if (!pageExists(page) && !bitmapExists(page))
				return "A page of the schedule was not found";
		}
	for (int i = 0; i < schedule.rule_count; i++)
		if (!pageExists(schedule.rules[i].page) && !bitmapExists(schedule.rules[i].page))
			return "The page of a rule was not found";
	page_schedule = schedule;
	saveSchedule(page_schedule);
	selector.setSchedule(&page_schedule);
	haApiWatchRules(&page_schedule);
	return nullptr;
}

const PageSchedule &appSchedule()
{
	return page_schedule;
}

void appBackToSchedule()
{
	selector.backToSchedule();
}

const char *appShownPage()
{
	return shown;
}

void appShowStatus(char *out, size_t size)
{
	static const char *const MODES[] = {"while true", "in rotation", "for a while"};
	switch (shown_choice.reason)
	{
	case ShowReason::Trigger:
	case ShowReason::Rotation:
		if (shown_choice.rule >= 0 && shown_choice.rule < page_schedule.rule_count)
		{
			const TriggerRule &r = page_schedule.rules[shown_choice.rule];
			snprintf(out, size, "rule %d (%s, %s)", shown_choice.rule + 1, r.entity, MODES[(int)r.mode]);
			return;
		}
		break;
	case ShowReason::Schedule:
		snprintf(out, size, "schedule");
		return;
	default:
		break;
	}
	int until = selector.pickedUntil();
	if (until >= 0)
		snprintf(out, size, "chosen, until %02d:%02d", until / 60, until % 60);
	else
		snprintf(out, size, selector.scheduleActive() ? "chosen" : "chosen (no schedule)");
}

// Which page now: the rules (from Home Assistant), the schedule, the chosen page
void appPageLoop(bool time_valid, const LocalTime &time)
{
	uint32_t now = millis();
	for (int i = 0; i < page_schedule.rule_count; i++)
	{
		const TriggerRule &r = page_schedule.rules[i];
		selector.setRuleState(i, ruleMatches(r, haApiValue(r.entity, r.attribute)), now);
	}
	time_known = time_valid;
	if (!time_valid)
		return;
	shown_choice = selector.update(time.hour * 60 + time.minute, now);
	if (!shown_choice.changed && sameName(shown, shown_choice.page))
		return;
	copyName(shown, shown_choice.page);
	applyPage(shown_choice.instant);
}

const char *appSelectOffPage(const char *name)
{
	if (name[0] && !bitmapExists(name))
		return "Bitmap not found";
	copyName(settings.off_page, name);
	saveSettings(settings);
	applyOffPage();
	controller.pageChanged();
	return nullptr;
}

const char *appSaveBitmap(const char *name, const uint8_t *bitmap)
{
	if (pageExists(name))
		return "A page has this name";
	const char *error = saveBitmap(name, bitmap);
	if (error)
		return error;
	if (sameName(settings.off_page, name))
		applyOffPage();
	reloadPage(); // the page or its background
	return nullptr;
}

// "Used by page X ..." (the returned text stays valid until the next call)
static const char *usedBy(const String &page)
{
	static char message[80];
	snprintf(message, sizeof(message), "Used by page \"%s\": change that page first", page.c_str());
	return message;
}

static const char *USED_BY_SCHEDULE = "Used by the schedule or a rule: change that first";

const char *appDeleteBitmap(const char *name)
{
	if (scheduleUses(page_schedule, name))
		return USED_BY_SCHEDULE;
	String user = pageUsingBitmap(name);
	if (user.length())
		return usedBy(user);
	const char *error = deleteBitmap(name);
	if (error)
		return error;
	if (sameName(settings.page, name))
		setChosen(DEFAULT_PAGE);
	if (sameName(settings.off_page, name))
		appSelectOffPage(OFF_PAGE_BLANK);
	return nullptr;
}

const char *appSavePage(const char *name, const DynamicPage &page)
{
	if (bitmapExists(name))
		return "A bitmap has this name";
	for (int i = 0; i < page.slot_count; i++)
		if (page.slots[i].bitmap[0] && !bitmapExists(page.slots[i].bitmap))
			return "Background bitmap not found";
	for (int i = 0; i < page.element_count; i++)
		if (!fontExists(page.elements[i].font))
			return "Font not found";
	const char *error = savePage(name, page);
	if (error)
		return error;
	if (sameName(shown, name))
		reloadPage();
	return nullptr;
}

const char *appDeletePage(const char *name)
{
	if (scheduleUses(page_schedule, name))
		return USED_BY_SCHEDULE;
	const char *error = deletePage(name);
	if (error)
		return error;
	if (sameName(settings.page, name))
		setChosen(DEFAULT_PAGE);
	return nullptr;
}

const char *appSaveFont(const char *name, const uint8_t *data, size_t size)
{
	const char *error = saveFont(name, data, size);
	if (error)
		return error;
	controller.pageChanged(); // the page may use it
	return nullptr;
}

const char *appDeleteFont(const char *name)
{
	String user = pageUsingFont(name);
	if (user.length())
		return usedBy(user);
	return deleteFont(name);
}

void appStopwatch(StopwatchAction action)
{
	if (action == StopwatchAction::Start)
		stopwatch.start(millis());
	else if (action == StopwatchAction::Stop)
		stopwatch.stop(millis());
	else
		stopwatch.reset();
	controller.pageChanged();
}

void appShowLive(const uint8_t *bitmap)
{
	frames.setLiveBitmap(bitmap);
	controller.showLive(millis());
}

void appStopLive()
{
	controller.stopLive();
}

bool appLocalTime(LocalTime &time)
{
	struct tm now = {};
	if (!getLocalTime(&now, 0))
		return false;
	time.year = now.tm_year + 1900;
	time.month = now.tm_mon + 1;
	time.day = now.tm_mday;
	time.weekday = now.tm_wday;
	time.hour = now.tm_hour;
	time.minute = now.tm_min;
	time.second = now.tm_sec;
	struct timeval tv;
	gettimeofday(&tv, nullptr);
	time.millisecond = tv.tv_usec / 1000;
	// Local time - UTC (summer time included), for Home Assistant's UTC timestamps
	struct tm utc = {};
	time_t seconds = tv.tv_sec;
	gmtime_r(&seconds, &utc);
	int day_diff = now.tm_yday - utc.tm_yday;
	if (day_diff > 1) // around new year
		day_diff = -1;
	else if (day_diff < -1)
		day_diff = 1;
	time.utc_offset = day_diff * 24 * 60 + (now.tm_hour - utc.tm_hour) * 60 + (now.tm_min - utc.tm_min);
	return true;
}

void appRestartLater(uint32_t delay_ms)
{
	restart_pending = true;
	restart_at = millis() + delay_ms;
}

void appLoop()
{
	if (restart_pending && (int32_t)(millis() - restart_at) >= 0)
	{
		Serial.println("Restarting for the new settings");
		ESP.restart();
	}
}