Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
40 lines
1.4 KiB
C++
40 lines
1.4 KiB
C++
#pragma once
|
|
// Internal interface between the hardware stand-ins (shim/, SimHardware.cpp)
|
|
// and the exported API (HexapodSimApi.cpp). Not visible to robot/ code.
|
|
#include <stdint.h>
|
|
|
|
namespace simhw {
|
|
|
|
// ---- Clock ----
|
|
void advanceMicros(uint32_t us);
|
|
uint64_t nowMicros();
|
|
|
|
// ---- Serial ----
|
|
void serialFeed(const char* bytes, int len); // Unity -> robot Serial.read()
|
|
int serialDrain(char* out, int cap); // robot Serial.print() -> Unity
|
|
|
|
// ---- Servos (indexed by pin) ----
|
|
constexpr int MAX_PINS = 64;
|
|
struct ServoPin {
|
|
bool attached = false;
|
|
int us = 1500; // Teensy Servo's default pulse after attach()
|
|
uint32_t writes = 0; // writeMicroseconds() calls since start
|
|
};
|
|
const ServoPin& servoPin(int pin);
|
|
|
|
// ---- MPU6050 ----
|
|
void imuSetPresent(bool present);
|
|
// Body-frame values as the chip would measure them: accel in g (reads +1 g
|
|
// on the axis pointing up when at rest), gyro in deg/s.
|
|
void imuSet(float ax, float ay, float az, float gx, float gy, float gz);
|
|
|
|
// ---- Radio ----
|
|
void radioSetPresent(bool present);
|
|
// Puts one packet "on air" using the protocol's channel/address/data rate.
|
|
void radioSend(const uint8_t* bytes, int len);
|
|
// The ack payload that came back with the last packet received (what the
|
|
// remote would read after write()). Returns its length, 0 if none yet.
|
|
int radioLastAckPayload(uint8_t* out, int cap);
|
|
|
|
} // namespace simhw
|