- Confirmed the status LED is on PA0 (active-high). README pin table updated:
amplifier (AT2401C) control is one of PA1/PB1/PF0/PF1, still to distinguish.
- app.c gains bring-up modes for mapping the amplifier pins:
- 'x' RX on the hexapod protocol (ch96/250k/HXPD1, 22-byte) + packet counter,
to find the RX-enable pin by which pin lets the remote's packets arrive;
- 'f'/'n' carrier-detect (RPD) finder (too noisy alone, kept for reference);
- 'a' sweep every usable pin HIGH ~3s for LED/scope checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>