Files
hexapod-robot/2026-current/sim/shim/EEPROM.h
T
mangavalkandClaude Opus 5.5 0b836af8de 2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value);
new 30-byte Telemetry rides back on the nRF24 ack payload (robot state,
IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops
wrong-length packets, so version mismatches still fail closed.

Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre
trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate
now always runs (leveling still gated by ROBOT GYRO).

Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash,
drive, status, servos, cal, setup, upload; page-aware NextionUI that only
writes the showing page and only what changed; servo calibration and
UPDATE DISPLAY on the touchscreen and serial console; battery module.
The display is on Serial2 (pins 7/8), found on the real remote; the old
sketch's Serial1 was never connected to it.

Sim: RF24 shim supports ack payloads, API version 8
(hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command.
Unity CmdPacket mirror updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 14:42:37 +01:00

18 lines
622 B
C++

#pragma once
// ServoDriver keeps its servo centre trims here. Backed by RAM, starts erased (0xFF),
// so every simulated power-on starts with no trims stored.
#include <Arduino.h>
class SimEEPROM {
public:
template <class T> T& get(int addr, T& t) { memcpy(&t, mem_ + addr, sizeof(T)); return t; }
template <class T> const T& put(int addr, const T& t) { memcpy(mem_ + addr, &t, sizeof(T)); return t; }
uint8_t read(int addr) { return mem_[addr]; }
void write(int addr, uint8_t v) { mem_[addr] = v; }
SimEEPROM() { memset(mem_, 0xFF, sizeof(mem_)); }
private:
uint8_t mem_[4284];
};
extern SimEEPROM EEPROM;