Files
hexapod-robot/2026-current/dongle/firmware/safeboot.ld
T
mangavalkandClaude Opus 4.8 97f580b6a5 2026 dongle: own firmware for the USB nRF24 stick, wire-free USB flashing
Reverse-engineered the AliExpress "USB_24RF Ver3.1" stick (STM32F030F4P6 +
Si24R1 + AT2401C PA + CH330N) and replaced its closed AT-command firmware so it
can be the PC-side radio for the hexapod.

- Pin map found over SWD and confirmed at runtime: USART1 PA9/PA10 (CH330N),
  SPI1 PA5/6/7, nRF CSN PA3 / CE PA4 / IRQ PA2. LED + AT2401C control are among
  the 5 free pins, still to map.
- Two-stage firmware so wire-free flashing can't be broken by an app update:
  - safeboot (4 KB, pages 0-3): permanent recovery bootloader, fixed-baud flash
    protocol over USB, only it survives every update;
  - app (12 KB, pages 4+): the radio firmware, the only part updates rewrite.
  The app updater never erases safeboot; recovery works even with a dead app.
- tools/dongle_flash.py: one-time install via the STM32 ROM bootloader (the only
  time the BOOT0 wire is used). tools/safeboot_flash.py: wire-free app updates.
- dongle/README.md documents the hardware, pin map, RDP1 (factory fw can't be
  dumped), the memory map and the flashing workflow.
- README: add dongle/ to the layout and the PC-radio plan.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-11-14 23:14:16 +01:00

19 lines
631 B
Plaintext

/* safeboot: first 4 KB of flash. RAM starts at +4 so the magic word at
* 0x20000000 is never touched by .data/.bss. */
MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 4K
RAM (rwx) : ORIGIN = 0x20000004, LENGTH = 4092
}
_estack = 0x20001000;
SECTIONS
{
.isr_vector : { KEEP(*(.isr_vector)) } > FLASH
.text : { *(.text*) *(.rodata*) . = ALIGN(4); } > FLASH
_sidata = LOADADDR(.data);
.data : { . = ALIGN(4); _sdata = .; *(.data*) . = ALIGN(4); _edata = .; } > RAM AT > FLASH
.bss : { . = ALIGN(4); _sbss = .; *(.bss*) *(COMMON) . = ALIGN(4); _ebss = .; } > RAM
/DISCARD/ : { *(.ARM.exidx*) *(.ARM.extab*) }
}