Files
hexapod-robot/2026-current/robot/Comms.h
T
mangavalkandClaude Opus 5.5 0b836af8de 2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value);
new 30-byte Telemetry rides back on the nRF24 ack payload (robot state,
IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops
wrong-length packets, so version mismatches still fail closed.

Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre
trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate
now always runs (leveling still gated by ROBOT GYRO).

Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash,
drive, status, servos, cal, setup, upload; page-aware NextionUI that only
writes the showing page and only what changed; servo calibration and
UPDATE DISPLAY on the touchscreen and serial console; battery module.
The display is on Serial2 (pins 7/8), found on the real remote; the old
sketch's Serial1 was never connected to it.

Sim: RF24 shim supports ack payloads, API version 8
(hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command.
Unity CmdPacket mirror updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 14:42:37 +01:00

32 lines
1011 B
C++

#pragma once
#include <Arduino.h>
#include <HexapodProtocol.h> // CmdPacket + FLAG_* + radio settings, shared with the remote (shared/)
class Comms {
public:
bool begin();
void update(); // call every loop; polls the radio if present
bool linkOk() const { return link_ok_; }
const CmdPacket& latest() const { return packet_; }
// Lets the serial test harness (or, later, real radio) inject a packet directly.
void injectPacket(const CmdPacket& p) { packet_ = p; last_rx_ms_ = millis(); }
// Telemetry for the remote. Goes out as the ack payload of the next packet
// received, so set it every loop.
void setTelemetry(const Telemetry& t) { telemetry_ = t; }
uint8_t packetsPerSec() const { return rx_per_sec_; }
private:
CmdPacket packet_;
uint32_t last_rx_ms_ = 0;
bool link_ok_ = false;
bool radio_present_ = false;
Telemetry telemetry_;
uint16_t rx_count_ = 0;
uint8_t rx_per_sec_ = 0;
uint32_t rate_window_ms_ = 0;
void loadAckPayload();
};