Files
hexapod-robot/2026-current/robot/RobotIMU.h
T
mangavalkandClaude Opus 5.5 0b836af8de 2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value);
new 30-byte Telemetry rides back on the nRF24 ack payload (robot state,
IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops
wrong-length packets, so version mismatches still fail closed.

Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre
trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate
now always runs (leveling still gated by ROBOT GYRO).

Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash,
drive, status, servos, cal, setup, upload; page-aware NextionUI that only
writes the showing page and only what changed; servo calibration and
UPDATE DISPLAY on the touchscreen and serial console; battery module.
The display is on Serial2 (pins 7/8), found on the real remote; the old
sketch's Serial1 was never connected to it.

Sim: RF24 shim supports ack payloads, API version 8
(hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command.
Unity CmdPacket mirror updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 14:42:37 +01:00

22 lines
646 B
C++

#pragma once
#include <Arduino.h>
class RobotIMU {
public:
bool begin(); // returns false if the IMU didn't respond
void update(float dt); // no-op if the IMU never came up
float rollDeg() const { return roll_deg_; }
float pitchDeg() const { return pitch_deg_; }
bool ok() const { return ok_; }
// Robot-gyro toggle from CmdPacket. The attitude is estimated either way
// (the remote shows it); robot.ino only levels the body while it's set.
bool enabled = true;
private:
float roll_deg_ = 0, pitch_deg_ = 0;
bool ok_ = false;
bool readRaw(float& ax, float& ay, float& az, float& gx, float& gy, float& gz);
};