113 lines
3.5 KiB
Python
113 lines
3.5 KiB
Python
"""Update the dongle application over USB via the permanent 'safeboot' stage 1.
|
|
No BOOT0 wire, no ST-Link, no ROM bootloader. Writes only the app region
|
|
(pages 4-15); safeboot itself is never touched.
|
|
|
|
usage: safeboot_flash.py app.bin [--port COM16]
|
|
|
|
How it enters flash mode:
|
|
1) if the app is running, 'b' makes it soft-reset into safeboot flash mode;
|
|
2) otherwise (dead/absent app) replug the dongle and this spams 'S' to catch
|
|
safeboot's cold-boot knock window.
|
|
"""
|
|
import sys, time, serial
|
|
|
|
APP_BASE = 0x08001000
|
|
PORT = "COM16"
|
|
|
|
|
|
def open_port(port, open_timeout=20.0):
|
|
"""Retry the open to win the race against programs (SignalRGB) that grab
|
|
CH340 COM ports on enumeration. Once held, the handle stays ours."""
|
|
t = time.time()
|
|
while True:
|
|
try:
|
|
return serial.Serial(port, 115200, timeout=0.3)
|
|
except serial.SerialException:
|
|
if time.time() - t > open_timeout:
|
|
raise
|
|
time.sleep(0.02)
|
|
|
|
|
|
def enter_flash(s):
|
|
# path 1: tell a running app to reset into safeboot
|
|
s.reset_input_buffer()
|
|
s.write(b"b")
|
|
t = time.time()
|
|
buf = b""
|
|
while time.time() - t < 1.5:
|
|
buf += s.read(64)
|
|
if b"SBF" in buf:
|
|
return True
|
|
time.sleep(0.05)
|
|
# path 2: knock (works during safeboot's cold-boot window, after a replug)
|
|
t = time.time()
|
|
while time.time() - t < 6.0:
|
|
s.write(b"S")
|
|
r = s.read(16)
|
|
if b"K" in r or b"SBF" in r or b"SB1" in r:
|
|
# drain, then confirm we're in flash mode
|
|
time.sleep(0.1); s.reset_input_buffer()
|
|
s.write(b"V"); time.sleep(0.1)
|
|
if b"SBV" in s.read(16):
|
|
return True
|
|
time.sleep(0.1)
|
|
return False
|
|
|
|
|
|
def expect(s, ch, what):
|
|
r = s.read(1)
|
|
if r != ch:
|
|
raise RuntimeError("%s: expected %r got %r" % (what, ch, r))
|
|
|
|
|
|
def main():
|
|
args = [a for a in sys.argv[1:] if not a.startswith("--")]
|
|
port = sys.argv[sys.argv.index("--port") + 1] if "--port" in sys.argv else PORT
|
|
data = open(args[0], "rb").read()
|
|
if len(data) % 2:
|
|
data += b"\xFF"
|
|
print("app %s: %d bytes -> 0x%08X" % (args[0], len(data), APP_BASE))
|
|
|
|
s = open_port(port)
|
|
print("entering safeboot flash mode...")
|
|
if not enter_flash(s):
|
|
print("could not enter flash mode (app not running? replug and retry)")
|
|
return 1
|
|
s.reset_input_buffer()
|
|
s.write(b"V"); time.sleep(0.1)
|
|
print("safeboot:", s.read(16).decode("ascii", "replace").strip())
|
|
|
|
print("erasing app region...")
|
|
s.write(b"E"); s.timeout = 3.0; expect(s, b"K", "erase"); s.timeout = 0.5
|
|
|
|
print("writing...")
|
|
for off in range(0, len(data), 128):
|
|
chunk = data[off:off + 128]
|
|
addr = APP_BASE + off
|
|
s.write(b"W" + addr.to_bytes(4, "little") + bytes([len(chunk)]) + chunk)
|
|
expect(s, b"K", "write @0x%08X" % addr)
|
|
|
|
print("verifying...")
|
|
bad = 0
|
|
for off in range(0, len(data), 128):
|
|
chunk = data[off:off + 128]
|
|
addr = APP_BASE + off
|
|
s.write(b"R" + addr.to_bytes(4, "little") + bytes([len(chunk)]))
|
|
rb = s.read(len(chunk))
|
|
if rb != chunk:
|
|
bad += 1
|
|
print(" mismatch @0x%08X" % addr)
|
|
if bad:
|
|
print("VERIFY FAILED (%d blocks)" % bad); return 1
|
|
|
|
print("verify OK; booting app.")
|
|
s.write(b"G"); expect(s, b"K", "go")
|
|
time.sleep(0.3)
|
|
print(s.read(256).decode("ascii", "replace").strip())
|
|
s.close()
|
|
return 0
|
|
|
|
|
|
if __name__ == "__main__":
|
|
sys.exit(main())
|