Files
hexapod-robot/2026-current/dongle/firmware
mangavalkandClaude Opus 5.5 2a4f6335dd 2026 dongle: LED is PA0, add RX/finder/sweep pin-finding modes to the app
- Confirmed the status LED is on PA0 (active-high). README pin table updated:
  amplifier (AT2401C) control is one of PA1/PB1/PF0/PF1, still to distinguish.
- app.c gains bring-up modes for mapping the amplifier pins:
  - 'x' RX on the hexapod protocol (ch96/250k/HXPD1, 22-byte) + packet counter,
    to find the RX-enable pin by which pin lets the remote's packets arrive;
  - 'f'/'n' carrier-detect (RPD) finder (too noisy alone, kept for reference);
  - 'a' sweep every usable pin HIGH ~3s for LED/scope checks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 23:39:50 +01:00
..