Commit Graph
4 Commits
Author SHA1 Message Date
mangavalkandClaude Opus 5.5 aeccba3be7 2026 remote: wiring as found on the real remote, IMU reset fix
- Nextion is on Serial2 (pins 7/8) - already in the last commit; docs updated.
- MPU6050 on Wire (18/19) so everything is on the edge headers (owner's
  choice); the two stick wires from 18/19 move to A7/A8 (21/22).
- Stick mapping checked on the real remote: left stick X/Y/twist on
  A3/A7/A8, right on A0/A1/A2, all inverted but the right twist.
- RemoteIMU: full device reset before waking. The remote's MPU6050 (likely
  a clone) answers and wakes without it but every data register reads 0.
  Axis defaults confirmed (+pitch nose down, +roll right side down).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 22:03:08 +01:00
mangavalkandClaude Opus 5.5 a961fa721b Remote: match the old remote's hardware; old remote code in LEGACY
- LEGACY/remote/teensy/: old remote sketch from
  https://mangavalk.com/Hexapod/remote.git @ 492dece (reference only).
- remote/Config.h: sticks on A0-A5, Nextion on Serial1 (0/1), as in the
  old sketch; MPU6050 moved to Wire2 (25/24) since A4/A5 are Wire's pins.
- NextionUI: controls on a vscope-global "control" page added to the
  old HMI; keeps the old t1 status texts; the old page-1 b2 button (and
  serial 'U') enter Nextion upload passthrough, following the PC's baud.
- Docs: NEXTION.md, remote README wiring, CLAUDE.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-01 15:29:21 +02:00
mangavalkandClaude Opus 5.5 935526eab5 Firmware simulation, Unity project, and sim-verified robot fixes
Simulation
- sim/: the unchanged robot firmware compiled into hexapod_sim.dll
  against PC stand-ins (Arduino, Servo, Wire + register-level MPU6050,
  RF24 with matching-config radio), a kinematic body model (support
  plane + planted-foot odometry) that also drives the simulated IMU,
  and a headless smoke test (sim_smoke). build.ps1 builds and tests.
- Hexapod_Simulation_Unity/ folded in (history kept in a bundle
  outside the repo). Assets/HexapodSim loads the DLL, drives the
  existing leg rig, and offers joystick / keyboard / robot-serial
  input plus a test panel.

Robot (all found or confirmed in the simulation)
- Config.h geometry taken from the Unity model.
- IK femur elevation sign, gait stance direction, body pose
  rotation direction, yaw lever arm.
- Stance feet integrated from the current command; gait restarts at
  mid-stance; heading integrates the applied turn rate, only while
  walking.
- Leg clearance and reach checks (Limits::feetFeasible); walk command
  and body pose scaled as a whole, pose scale rate-limited, planted
  feet guarded so the body never snaps or legs collide.
- Robot-gyro self-leveling as an integrator.
- Heading mode: steering relative to the body; S walks backward.
- Standing height from the remote (STANCE_HEIGHT_RANGE_MM).

Protocol v3 (reflash both boards)
- CmdPacket gains body_height (22 bytes).

Remote
- Height slider (Nextion hHeight/nHeight, serial [ ]).
- Fixed unspecified I2C read order in RemoteIMU.

LEGACY/: owner's old Nextion HMI and remote hardware assets.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-29 00:37:12 +02:00
mangavalkandClaude Opus 5.5 91dac16fca Draft: shared protocol, remote firmware, project docs
Not yet verified on hardware.

- shared/HexapodProtocol: CmdPacket (now 20 bytes, adds remote_roll /
  remote_pitch), FLAG_* bits and radio settings as the single protocol
  definition; static payload size = sizeof(CmdPacket) on both radios.
- robot: use the shared protocol; vx = forward (harness w/x <-> q/e);
  InputMapper adds remote tilt on top of the right stick when
  FLAG_REMOTE_GYRO is set, and robot.ino no longer zeroes stick
  roll/pitch when it's off.
- remote (Teensy 4.1): Sticks (calibration, EEPROM), RemoteIMU,
  RemoteState (interlocks, link-loss disarm, smoothing), PacketBuilder,
  RadioLink, NextionUI, SerialConsole.
- CLAUDE.md, README.md, remote/README.md, remote/NEXTION.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-28 18:14:00 +02:00