Commit Graph
3 Commits
Author SHA1 Message Date
mangavalkandClaude Opus 5.5 0b836af8de 2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value);
new 30-byte Telemetry rides back on the nRF24 ack payload (robot state,
IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops
wrong-length packets, so version mismatches still fail closed.

Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre
trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate
now always runs (leveling still gated by ROBOT GYRO).

Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash,
drive, status, servos, cal, setup, upload; page-aware NextionUI that only
writes the showing page and only what changed; servo calibration and
UPDATE DISPLAY on the touchscreen and serial console; battery module.
The display is on Serial2 (pins 7/8), found on the real remote; the old
sketch's Serial1 was never connected to it.

Sim: RF24 shim supports ack payloads, API version 8
(hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command.
Unity CmdPacket mirror updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 14:42:37 +01:00
mangavalkandClaude Opus 5.5 a961fa721b Remote: match the old remote's hardware; old remote code in LEGACY
- LEGACY/remote/teensy/: old remote sketch from
  https://mangavalk.com/Hexapod/remote.git @ 492dece (reference only).
- remote/Config.h: sticks on A0-A5, Nextion on Serial1 (0/1), as in the
  old sketch; MPU6050 moved to Wire2 (25/24) since A4/A5 are Wire's pins.
- NextionUI: controls on a vscope-global "control" page added to the
  old HMI; keeps the old t1 status texts; the old page-1 b2 button (and
  serial 'U') enter Nextion upload passthrough, following the PC's baud.
- Docs: NEXTION.md, remote README wiring, CLAUDE.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-01 15:29:21 +02:00
mangavalkandClaude Opus 5.5 91dac16fca Draft: shared protocol, remote firmware, project docs
Not yet verified on hardware.

- shared/HexapodProtocol: CmdPacket (now 20 bytes, adds remote_roll /
  remote_pitch), FLAG_* bits and radio settings as the single protocol
  definition; static payload size = sizeof(CmdPacket) on both radios.
- robot: use the shared protocol; vx = forward (harness w/x <-> q/e);
  InputMapper adds remote tilt on top of the right stick when
  FLAG_REMOTE_GYRO is set, and robot.ino no longer zeroes stick
  roll/pitch when it's off.
- remote (Teensy 4.1): Sticks (calibration, EEPROM), RemoteIMU,
  RemoteState (interlocks, link-loss disarm, smoothing), PacketBuilder,
  RadioLink, NextionUI, SerialConsole.
- CLAUDE.md, README.md, remote/README.md, remote/NEXTION.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-28 18:14:00 +02:00