Commit Graph
91 Commits
Author SHA1 Message Date
mangavalk f67a12ce88 Cast abs() arguments to long long in InverseKinemetics
Recovered from the uncommitted working copy in the 'Projecten nov 2016' backup.
2026-10-25 00:31:21 +02:00
mangavalk 902b4501aa Add README and .gitattributes 2026-10-24 23:50:19 +02:00
mangavalkandClaude Opus 5.5 5ff85c4eb8 Robot: Teensy 3.6 with the old robot's servo wiring and calibration
- LEGACY/Hexapod_Teensy/: old robot sketch (reference only).
- platformio.ini: robot env targets teensy36 (owner-confirmed board).
- Config.h: per-servo SERVOS table (pin, pulse at 0 deg, signed
  us/deg, pulse limits) built from the old sketch's pins, ranges, trims
  and the old Unity servo directions. Rear-left/front-left coxa offsets
  set to 0: the owner re-horns those two servos (the old +-90 left them
  at the end of travel; the sim showed them clamping).
- ServoDriver: 18 servos on hardware PWM (50 Hz, 16-bit); the Teensy 3.6
  Servo library stops at 12.
- Radio on CE 39 / CSN 15 with SPI SCK on pin 14.
- sim: analogWrite/PWM shims, pulses decoded through SERVOS (API v6).
- Docs: CLAUDE.md, READMEs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-01 15:53:55 +02:00
mangavalkandClaude Opus 5.5 a961fa721b Remote: match the old remote's hardware; old remote code in LEGACY
- LEGACY/remote/teensy/: old remote sketch from
  https://mangavalk.com/Hexapod/remote.git @ 492dece (reference only).
- remote/Config.h: sticks on A0-A5, Nextion on Serial1 (0/1), as in the
  old sketch; MPU6050 moved to Wire2 (25/24) since A4/A5 are Wire's pins.
- NextionUI: controls on a vscope-global "control" page added to the
  old HMI; keeps the old t1 status texts; the old page-1 b2 button (and
  serial 'U') enter Nextion upload passthrough, following the PC's baud.
- Docs: NEXTION.md, remote README wiring, CLAUDE.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-01 15:29:21 +02:00
mangavalk 81fa7f1429 Update files 2026-10-01 15:09:00 +02:00
mangavalkandClaude Opus 5.5 935526eab5 Firmware simulation, Unity project, and sim-verified robot fixes
Simulation
- sim/: the unchanged robot firmware compiled into hexapod_sim.dll
  against PC stand-ins (Arduino, Servo, Wire + register-level MPU6050,
  RF24 with matching-config radio), a kinematic body model (support
  plane + planted-foot odometry) that also drives the simulated IMU,
  and a headless smoke test (sim_smoke). build.ps1 builds and tests.
- Hexapod_Simulation_Unity/ folded in (history kept in a bundle
  outside the repo). Assets/HexapodSim loads the DLL, drives the
  existing leg rig, and offers joystick / keyboard / robot-serial
  input plus a test panel.

Robot (all found or confirmed in the simulation)
- Config.h geometry taken from the Unity model.
- IK femur elevation sign, gait stance direction, body pose
  rotation direction, yaw lever arm.
- Stance feet integrated from the current command; gait restarts at
  mid-stance; heading integrates the applied turn rate, only while
  walking.
- Leg clearance and reach checks (Limits::feetFeasible); walk command
  and body pose scaled as a whole, pose scale rate-limited, planted
  feet guarded so the body never snaps or legs collide.
- Robot-gyro self-leveling as an integrator.
- Heading mode: steering relative to the body; S walks backward.
- Standing height from the remote (STANCE_HEIGHT_RANGE_MM).

Protocol v3 (reflash both boards)
- CmdPacket gains body_height (22 bytes).

Remote
- Height slider (Nextion hHeight/nHeight, serial [ ]).
- Fixed unspecified I2C read order in RemoteIMU.

LEGACY/: owner's old Nextion HMI and remote hardware assets.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-29 00:37:12 +02:00
mangavalkandClaude Opus 5.5 91dac16fca Draft: shared protocol, remote firmware, project docs
Not yet verified on hardware.

- shared/HexapodProtocol: CmdPacket (now 20 bytes, adds remote_roll /
  remote_pitch), FLAG_* bits and radio settings as the single protocol
  definition; static payload size = sizeof(CmdPacket) on both radios.
- robot: use the shared protocol; vx = forward (harness w/x <-> q/e);
  InputMapper adds remote tilt on top of the right stick when
  FLAG_REMOTE_GYRO is set, and robot.ino no longer zeroes stick
  roll/pitch when it's off.
- remote (Teensy 4.1): Sticks (calibration, EEPROM), RemoteIMU,
  RemoteState (interlocks, link-loss disarm, smoothing), PacketBuilder,
  RadioLink, NextionUI, SerialConsole.
- CLAUDE.md, README.md, remote/README.md, remote/NEXTION.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-28 18:14:00 +02:00
mangavalkandClaude Opus 5.5 ad77b06c36 Initial import: robot firmware + PlatformIO two-env scaffold
Robot-side firmware (Teensy 4.0) imported unchanged as extracted.
platformio.ini defines [env:robot] (teensy40) and [env:remote]
(teensy41); scripts/select_src_dir.py points each env at its own
sketch folder so robot/ and remote/ stay Arduino-style sketches.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-28 15:36:37 +02:00
mangavalk 772e4c34ed upgrade to new unity version 2023-04-10 15:11:41 +02:00
mangavalk 43e60d535a updated walk and controller input to joystick 2022-12-04 23:11:05 +01:00
mangavalk 4be4615a10 Updated to new design 2019-06-10 15:20:47 +02:00
mangavalk 6706350811 wireless working 2019-05-26 22:58:04 +02:00
mangavalk 1217fcec34 wip wireless
payload max 32byte problem
2019-05-26 22:29:00 +02:00
mangavalk 4ec5020ef7 First version including eeprom 2019-05-25 23:36:25 +02:00
mangavalk 4bbd5c1828 Initial commit 2019-05-25 21:32:46 +00:00
mangavalk e1e06ee2cb better walk control 2019-05-19 15:54:46 +02:00
mangavalk b147e3376f joystick 2019-05-19 00:18:28 +02:00
mangavalk 9b40dccbf4 v9 walk3 wip 2018-11-19 22:21:47 +01:00
mangavalk 98b0fb4466 v8 added walking and rotation at the same time :D 2018-11-15 20:34:00 +01:00
mangavalk cc2f3cf8c6 fix problem in returning to home 2018-11-15 16:37:54 +01:00
mangavalk 04062fc3b8 v7 slow talking :D 2018-11-15 14:11:50 +01:00
mangavalk 8630ef0753 v6 rotational walking :D 2018-11-14 22:22:38 +01:00
mangavalk 054cfb6d72 v5 ITS ALIVE, IT WALKS! 2018-11-13 23:09:58 +01:00
mangavalk 9dcf9a6190 Added serial link to SSC32 2018-11-12 23:57:23 +01:00
mangavalk 235a81c280 v4 transformation after rotation added. 2018-11-11 22:26:43 +01:00
mangavalk 21da5d3a8b v3 working transformations and working knie offset :D 2018-11-11 18:11:13 +01:00
mangavalk e6697e9980 beautify 2018-11-10 23:54:58 +01:00
mangavalk 67eb222ced v2 WORKING ROTATIONS 2018-11-10 23:23:03 +01:00
mangavalk 5acd47f2ef v1 2018-11-10 20:44:41 +01:00
mangavalk ca0dfcf923 Initial commit 2018-11-10 20:44:12 +01:00
Patrick Valk 3991264790 added gitignore 2016-11-14 13:45:03 +01:00
mangavalk 972ba2cb73 Add CustomTimer and separate left/right leg handling
Imported from the unarchived 'hexapod' sketch folder. The real date of this
version is unknown; file dates were lost in a 2016-11-14 copy.
2016-11-14 13:07:00 +01:00
mangavalk 7aa1cc9d4e Add new file 2016-11-08 10:47:29 +00:00
mangavalk bc13cdbbbe Update README.md 2016-11-08 09:15:16 +00:00
mangavalk 8a770c9d36 Add new file 2016-11-08 09:14:36 +00:00
mangavalk 0447cb8c7a Rework HexapodClass
Imported from 'hexapod 4.rar'.
processing-rar-4
2014-10-13 00:49:00 +02:00
mangavalk 00bf3187fe Split leg and body logic into FootClass and HexapodClass
Imported from 'hexapod 3.rar'.
processing-rar-3
2014-10-12 16:17:00 +02:00
mangavalk c977b3acab Clean up main sketch
Imported from 'hexapod 2.rar'.
processing-rar-2
2014-10-06 22:39:00 +02:00
mangavalk 78c5c11d41 Hexapod simulator: first version
Single-sketch version, imported from 'Hexapod 1.rar'.
processing-rar-1
2014-10-06 14:30:00 +02:00
Administrator 1f1715c841 First commit 2014-02-17 11:50:52 +01:00
mangavalk 4d4b12e6b3 First commit 2014-02-16 00:13:50 +01:00