Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value);
new 30-byte Telemetry rides back on the nRF24 ack payload (robot state,
IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops
wrong-length packets, so version mismatches still fail closed.
Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre
trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate
now always runs (leveling still gated by ROBOT GYRO).
Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash,
drive, status, servos, cal, setup, upload; page-aware NextionUI that only
writes the showing page and only what changed; servo calibration and
UPDATE DISPLAY on the touchscreen and serial console; battery module.
The display is on Serial2 (pins 7/8), found on the real remote; the old
sketch's Serial1 was never connected to it.
Sim: RF24 shim supports ack payloads, API version 8
(hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command.
Unity CmdPacket mirror updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The old HMI's pages are 0 splashsceen, 1 main, 2 servocal, 3 page0,
4 uploadscreen, 5 joysticks; the link-status texts are main.t1 and
page0.t1 (not page1.t1/page3.t1, which the display silently ignored).
remote.HMI is the 2019 project re-saved by Nextion Editor 1.68, to work
on here instead of in 2019-teensy-nrf24/.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>