2026 remote: build for the Teensy 4.0 actually in the remote
Board teensy41 -> teensy40. All pins exist on the 4.0; the MPU6050's Wire2 (SDA2 25 / SCL2 24) is on the underside solder pads. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
769d72462d
commit
e23216b3a1
7 files changed
+20
-18
No files matched your search
@@ -129,8 +129,8 @@ Also from the owner: the bump on top of the middle post is a lanyard loop
|
||||
(the original's tunnel through it is modelled); the square hole is the on/off
|
||||
slide switch, mounted on top (same switch as the robot). Inside: an IMU on the
|
||||
21 x 9 mm block (assumed GY-521), a USB-C breakout on the side-port block, and
|
||||
a Teensy **4.0** (confirmed by the owner, although `platformio.ini` builds
|
||||
the remote for a 4.1); it has no mounting holes and is placed on the
|
||||
a Teensy **4.0** (confirmed by the owner; `platformio.ini` now builds
|
||||
the remote for it); it has no mounting holes and is placed on the
|
||||
hole-less 8 x 24 mm block as a guess.
|
||||
Open: what the 6 mm x 10 mm holes in the bottom bosses hold (magnets?), and
|
||||
whether the upper two bosses are meant to be asymmetric (x -80.387 / +82.73).
|
||||
|
||||
Reference in new issue
Block a user