2026 docs: update the planned/future notes
- PLANNING.md: IMU on the pin headers is done; battery firmware is done except the % curve and the low-battery warning. - README "Where to go next": link sim/README and dongle/README. - remote/README intro: telemetry comes back; the sim can answer via the dongle. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
175a1a0da8
commit
a59faf3b03
3 files changed
+16
-8
No files matched your search
@@ -110,7 +110,11 @@ Design notes, checks and open points: [hardware/openscad/PLANNING.md](hardware/o
|
||||
robot without a remote.
|
||||
- **[remote/README.md](remote/README.md)**: wiring, control scheme, stick
|
||||
calibration, and the remote's serial console.
|
||||
- **[remote/NEXTION.md](remote/NEXTION.md)**: how to build the touchscreen
|
||||
HMI.
|
||||
- **[remote/NEXTION.md](remote/NEXTION.md)**: the touchscreen HMI (generated
|
||||
by `scripts/make_remote_hmi.py`).
|
||||
- **[sim/README.md](sim/README.md)**: the robot firmware in simulation, headless
|
||||
and in Unity, with the keyboard or the real remote over the radio.
|
||||
- **[dongle/README.md](dongle/README.md)**: the USB nRF24 stick, its firmware,
|
||||
flashing and the bridge protocol.
|
||||
- **[shared/HexapodProtocol/HexapodProtocol.h](shared/HexapodProtocol/HexapodProtocol.h)**:
|
||||
the protocol. Change it only by reflashing both boards.
|
||||
Reference in new issue
Block a user