2026 dongle: own firmware for the USB nRF24 stick, wire-free USB flashing

Reverse-engineered the AliExpress "USB_24RF Ver3.1" stick (STM32F030F4P6 +
Si24R1 + AT2401C PA + CH330N) and replaced its closed AT-command firmware so it
can be the PC-side radio for the hexapod.

- Pin map found over SWD and confirmed at runtime: USART1 PA9/PA10 (CH330N),
  SPI1 PA5/6/7, nRF CSN PA3 / CE PA4 / IRQ PA2. LED + AT2401C control are among
  the 5 free pins, still to map.
- Two-stage firmware so wire-free flashing can't be broken by an app update:
  - safeboot (4 KB, pages 0-3): permanent recovery bootloader, fixed-baud flash
    protocol over USB, only it survives every update;
  - app (12 KB, pages 4+): the radio firmware, the only part updates rewrite.
  The app updater never erases safeboot; recovery works even with a dead app.
- tools/dongle_flash.py: one-time install via the STM32 ROM bootloader (the only
  time the BOOT0 wire is used). tools/safeboot_flash.py: wire-free app updates.
- dongle/README.md documents the hardware, pin map, RDP1 (factory fw can't be
  dumped), the memory map and the flashing workflow.
- README: add dongle/ to the layout and the PC-radio plan.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 4.8 committed 2026-11-14 23:14:16 +01:00
1 parent 0f9655d646
commit 97f580b6a5
12 files changed
+885 -10

No files matched your search

+2
View File
@@ -0,0 +1,2 @@
# build artifacts (regenerate with firmware/build.ps1)
build/