2026 remote v2: clamps for the 56x80 perfboard, generated inlay 3MF
- remote_v2.scad: main board is the measured 56 x 80 mm perfboard, held by 4 side clamps (M3 button head + washer into inserts), no holes in the board - export_3mf.py writes remote_v2_top_inlays.3mf (top shell + honeycomb + ON/OFF on filaments 1/2/3); remote_v2_top_multicolor.3mf stays the owner's OrcaSlicer project - STLs re-exported, README printing table and PLANNING notes updated Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
80270ba17e
commit
4aeb79dc89
6 files changed
+22
-16
No files matched your search
@@ -2,7 +2,7 @@
|
||||
|
||||
python export_3mf.py (from hardware/openscad, after the STL export)
|
||||
|
||||
Writes stl/remote_v2/remote_v2_top_multicolor.3mf: the top shell with its
|
||||
Writes stl/remote_v2/remote_v2_top_inlays.3mf: the top shell with its
|
||||
two inlays as ONE object with three parts, in the same frame, each part on
|
||||
its own extruder/filament (1 = case, 2 = honeycomb, 3 = ON/OFF text). The
|
||||
part list is in PARTS below. Uses the PrusaSlicer 3MF layout (one mesh, the
|
||||
@@ -21,7 +21,7 @@ PARTS = [
|
||||
("remote_v2_inlay.stl", "honeycomb inlay (red)", 2),
|
||||
("remote_v2_text.stl", "ON-OFF inlay (white)", 3),
|
||||
]
|
||||
OUT = "remote_v2_top_multicolor.3mf"
|
||||
OUT = "remote_v2_top_inlays.3mf" # remote_v2_top_multicolor.3mf is the owner's OrcaSlicer project
|
||||
|
||||
|
||||
def read_stl(path):
|
||||
|
||||
Reference in new issue
Block a user