2026 docs: review of every README against today's state
- README / CLAUDE.md layout: dongle/, hardware/, tools/ submodule, make_remote_hmi.py; telemetry in the protocol; the PC can take the robot's place on the radio. CLAUDE.md: NextionUI is on Serial2 (said Serial1); remote-without-robot via the dongle + sim. - remote/README: MPU6050 supply row; stick calibration button names of the new SETUP page; upload/USB-port hints. - remote/NEXTION.md: display on Serial2, how the Editor upload goes. - robot/README: Battery in the file list, Comms/ServoDriver roles, packet structs instead of payload size, check the IMU gives live data (the remote's MPU6050 needed a full reset; RobotIMU::begin() only wakes it). - sim/README: smoke test covers telemetry and servo calibration; OpenScadModel. - dongle/README: AT2401C test result, app command table, SignalRGB note, air settings incl. ack payloads. - PLANNING.md: the display direction is in the generated HMI. - Unity README: what the project is. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
a59faf3b03
commit
179afdb705
9 files changed
+92
-33
No files matched your search
@@ -1 +1,5 @@
|
||||
Hexapod
|
||||
|
||||
The Unity side of the firmware simulation: it runs the unchanged robot firmware
|
||||
(`../sim/build/hexapod_sim.dll`) on the 3D model, driven by the keyboard or by the
|
||||
real remote over the radio (USB nRF24 dongle). See `../sim/README.md`.
|
||||
Reference in new issue
Block a user