2026 docs: catch the READMEs up with today's state

- README: the HMI is generated turned round (nothing to set in the Editor);
  PC radio link: bridge mode done, no USB links any more, what's left
  (Unity driving the real robot, three nodes at once).
- remote/README checklist: sticks and IMU checked, display uploaded, radio
  checked against the sim through the dongle; replace the IMU board.
- CLAUDE.md: display runs the new HMI; next steps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-17 22:52:44 +01:00
1 parent 1591105f26
commit 175a1a0da8
3 files changed
+41 -42

No files matched your search

+6 -6
View File
@@ -409,9 +409,8 @@ Remote (`remote/README.md` has detail):
- The Nextion must have `bauds=115200` in Program.s, and the HMI must match
`NEXTION.md`. The working HMI is `remote/remote.HMI`, generated by
`scripts/make_remote_hmi.py` (owner-approved design, 2026-11-17; the old 6-page one in
`../2019-teensy-nrf24/remote-nextion/` only lends its splash picture). The display still
runs the old HMI until the new `.tft` is uploaded: use serial key `U` for that first upload,
the old UPLOAD button isn't recognised any more. Edit and render it with the `nxhmi` MCP server
`../2019-teensy-nrf24/remote-nextion/` only lends its splash picture). It's on the real
display (turned 180°, see `remote/NEXTION.md`). Edit and render it with the `nxhmi` MCP server
(registered in the repo root `.mcp.json`; code is the git submodule `tools/nextion-hmi-tools`,
run `git submodule update --init` after cloning; CLI `python -m nxhmi` with `PYTHONPATH` =
`tools/nextion-hmi-tools/src`): `info`, `get_page`, `render_page`, `set_attributes`,
@@ -468,6 +467,7 @@ Remote (`remote/README.md` has detail):
rate limiting on any setpoint that can jump, and paired `.h/.cpp` per
concern.
- Planned or possible next steps: wire the battery dividers (firmware is
ready on both sides, pins still 255) and add a low-battery warning; try
ack-payload telemetry and servo calibration on the real radios (only
simulated so far).
ready on both sides, pins still 255) and add a low-battery warning;
flash the robot with protocol v4 and try telemetry and servo calibration
with it (the real remote ↔ dongle ↔ Unity sim path already works over the
air, 2026-11-17); Unity driving the real robot through the dongle.