2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration

Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value);
new 30-byte Telemetry rides back on the nRF24 ack payload (robot state,
IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops
wrong-length packets, so version mismatches still fail closed.

Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre
trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate
now always runs (leveling still gated by ROBOT GYRO).

Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash,
drive, status, servos, cal, setup, upload; page-aware NextionUI that only
writes the showing page and only what changed; servo calibration and
UPDATE DISPLAY on the touchscreen and serial console; battery module.
The display is on Serial2 (pins 7/8), found on the real remote; the old
sketch's Serial1 was never connected to it.

Sim: RF24 shim supports ack payloads, API version 8
(hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command.
Unity CmdPacket mirror updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-17 14:42:37 +01:00
1 parent 481610c9fd
commit 0b836af8de
40 files changed
+1463 -281

No files matched your search

+11 -2
View File
@@ -8,8 +8,11 @@ enum rf24_datarate_e { RF24_1MBPS = 0, RF24_2MBPS, RF24_250KBPS };
// A simulated radio. Packets the simulation puts "on air" (hxsim_radio_send)
// are only received if this radio's channel, data rate, address and static
// payload size match the sender's, just like the real nRF24L01. The RX FIFO
// holds 3 packets; extra packets are dropped.
// payload size match the sender's, just like the real nRF24L01 (with dynamic
// payloads - enableAckPayload() - any length up to 32 is received). The RX
// FIFO holds 3 packets; extra packets are dropped. An ack payload queued with
// writeAckPayload() goes back with the next packet received, like the chip's
// auto-ack (hxsim_get_ack_payload shows it).
class RF24 {
public:
RF24(uint16_t ce_pin, uint16_t csn_pin) { (void)ce_pin; (void)csn_pin; }
@@ -27,6 +30,11 @@ public:
bool available();
void read(void* buf, uint8_t len);
bool write(const void*, uint8_t) { return false; } // the robot never transmits
void enableDynamicPayloads() { dynamic_ = true; }
void enableAckPayload() { dynamic_ = true; }
uint8_t getDynamicPayloadSize();
bool writeAckPayload(uint8_t pipe, const void* buf, uint8_t len);
uint8_t flush_tx();
private:
uint8_t payload_size_ = 32;
@@ -35,4 +43,5 @@ private:
uint8_t address_[5] = {};
bool pipe_open_ = false;
bool listening_ = false;
bool dynamic_ = false;
};