2026 remote: tabbed Nextion UI, robot telemetry, servo centre calibration
Protocol v4: CmdPacket grows to 26 bytes (cal_cmd, cal_servo, cal_value); new 30-byte Telemetry rides back on the nRF24 ack payload (robot state, IMU, battery, 18 joint angles, packets/s, servo-cal echo). Each end drops wrong-length packets, so version mismatches still fail closed. Robot (owner-approved): SERVO_CAL state while disarmed, per-servo centre trims (+-200 us) in EEPROM, telemetry, battery reading; the IMU estimate now always runs (leveling still gated by ROBOT GYRO). Remote: generated HMI (scripts/make_remote_hmi.py) with pages splash, drive, status, servos, cal, setup, upload; page-aware NextionUI that only writes the showing page and only what changed; servo calibration and UPDATE DISPLAY on the touchscreen and serial console; battery module. The display is on Serial2 (pins 7/8), found on the real remote; the old sketch's Serial1 was never connected to it. Sim: RF24 shim supports ack payloads, API version 8 (hxsim_get_ack_payload); sim_smoke checks telemetry and every CAL command. Unity CmdPacket mirror updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
481610c9fd
commit
0b836af8de
40 files changed
+1463
-281
No files matched your search
@@ -32,5 +32,8 @@ void imuSet(float ax, float ay, float az, float gx, float gy, float gz);
|
||||
void radioSetPresent(bool present);
|
||||
// Puts one packet "on air" using the protocol's channel/address/data rate.
|
||||
void radioSend(const uint8_t* bytes, int len);
|
||||
// The ack payload that came back with the last packet received (what the
|
||||
// remote would read after write()). Returns its length, 0 if none yet.
|
||||
int radioLastAckPayload(uint8_t* out, int cap);
|
||||
|
||||
} // namespace simhw
|
||||
Reference in new issue
Block a user